View Issue Details

IDProjectCategoryView StatusLast Update
0000456OpenFOAMBugpublic2012-03-13 08:50
Reporteruser371Assigned Touser4 
PrioritynormalSeverityminorReproducibilityhave not tried
Status resolvedResolutionfixed 
Platformx86_64OSRHEL5OS Version2.6.18-238.el5
Summary0000456: scotch error in 2.1.x and not on 2.1.0
Description

I have this scotch error during the decomposePar for version 2.1.x (but it works well for 2.1.0 !!) :

Selecting decompositionMethod scotch
ERROR: graphCheck: arc data do not match

The mesh is imported from starccm+ and the checkMesh is as following :

Mesh stats
    points: 968719
    faces: 2800149
    internal faces: 2735169
    cells: 914835
    boundary patches: 5
    point zones: 0
    face zones: 0
    cell zones: 0

Overall number of cells of each type:
    hexahedra: 808786
    prisms: 46464
    wedges: 2207
    pyramids: 18
    tet wedges: 85
    tetrahedra: 2520
    polyhedra: 54755

Checking topology...
    Boundary definition OK.
    Cell to face addressing OK.
    Point usage OK.
  <<Found 8 neighbouring cells with multiple inbetween faces.
    Upper triangular ordering OK.
  <<Writing 16 unordered faces to set upperTriangularFace
    Face vertices OK.
    Number of regions: 1 (OK).

Checking patch topology for multiply connected surfaces ...
    Patch Faces Points Surface topology
    Domaine.atmosphere 890 976 ok (non-closed singly connected)
    Domaine.inlet 784 855 ok (non-closed singly connected)
    Domaine.outlet 784 855 ok (non-closed singly connected)
    Domaine.sides 24431 25513 ok (non-closed singly connected)
    Domaine.KCS.hull 38091 36155 ok (non-closed singly connected)

Checking geometry...
    Overall domain bounding box (-18.1967792511 -1.11022302463e-16 -10.5762844086) (18.1967792511 10.9180669785 3.98113870621)
    Mesh (non-empty, non-wedge) directions (1 1 1)
    Mesh (non-empty) directions (1 1 1)
    Boundary openness (-1.79697257387e-17 -2.26597063118e-16 1.44598643838e-17) OK.
    Max cell openness = 4.56743543792e-16 OK.
    Max aspect ratio = 64.000152588 OK.
    Minumum face area = 8.37399447562e-07. Maximum face area = 0.640001449586. Face area magnitudes OK.
    Min volume = 3.52331657277e-09. Max volume = 0.512001281739. Total volume = 5782.13050418. Cell volumes OK.
    Mesh non-orthogonality Max: 79.9750355545 average: 6.57560755348
   *Number of severely non-orthogonal faces: 2444.
    Non-orthogonality check OK.
  <<Writing 2444 non-orthogonal faces to set nonOrthoFaces
    Face pyramids OK.
    Max skewness = 2.48066390719 OK.
    Coupled point location match (average 0) OK.

Mesh OK.

End
TagsNo tags attached.

Activities

user4

2012-03-13 08:50

  ~0001135

Fixed in 9d7bbdb7ed0fa06e253328ddd932567968f4db52.

It was the filtering of cells with multiple inbetween faces (which sometimes occurs in ccm+ meshes)

Thanks for reporting,

Mattijs

Issue History

Date Modified Username Field Change
2012-03-09 17:44 user371 New Issue
2012-03-13 08:50 user4 Note Added: 0001135
2012-03-13 08:50 user4 Status new => resolved
2012-03-13 08:50 user4 Fixed in Version => 2.1.x
2012-03-13 08:50 user4 Resolution open => fixed
2012-03-13 08:50 user4 Assigned To => user4