View Issue Details

IDProjectCategoryView StatusLast Update
0003642OpenFOAMBugpublic2021-03-15 10:44
ReporterCyprienRAssigned Tohenry 
PriorityhighSeveritymajorReproducibilityalways
Status resolvedResolutionfixed 
PlatformGNU/Linux Ubuntu 18.04OSLinuxOS VersionUbuntu 18.04
Product Version8 
Fixed in Version8 
Summary0003642: Sigma XX values for plateHole Case in UserGuide are not correct
DescriptionWith OpenFoam 8, I followed the steps mentioned in the user guide for the stress analysis of a plate with hole:
https://cfd.direct/openfoam/user-guide/v8-plateHole/#x6-390002.2

I didn't change anything, I just:
- copied the case into my $FOAM_RUN
- Generated the mesh with blockMesh
- Run the solver with solidDisplacementFoam

The maximum sigma xx stress obtained for the time step 100 is 2.5e8 Pa.
The image from the user guide shows a maximum value of 3e4 Pa (30 kPa)

I tried to come back to an earlier value of OpenFoam and recalculated with OpenFoam v5
Results come as in the user guide with the v5

Seems like something has changed in the v8
Either the Case need to be updated or there is a bug somewhere in the solidDisplacementFoam Solver

Steps To Reproduce- copy the case into my $FOAM_RUN
- Generated the mesh with blockMesh
- Run the solver with solidDisplacementFoam
TagsNo tags attached.

Activities

CyprienR

2021-03-15 02:47

reporter  

plateHole op8.png (43,285 bytes)
plateHole op8.png (43,285 bytes)
plateHole op5.png (54,474 bytes)
plateHole op5.png (54,474 bytes)

henry

2021-03-15 10:44

manager   ~0011941

Resolved in OpenFOAM-8 by commit 1c9b5879390b09ea0320e98800aca0974dfcdc41
Resolved in OpenFOAM-dev by commit 84103902acc3af7967672daf16ac185cf2089479

Issue History

Date Modified Username Field Change
2021-03-15 02:47 CyprienR New Issue
2021-03-15 02:47 CyprienR File Added: plateHole op8.png
2021-03-15 02:47 CyprienR File Added: plateHole op5.png
2021-03-15 10:44 henry Assigned To => henry
2021-03-15 10:44 henry Status new => resolved
2021-03-15 10:44 henry Resolution open => fixed
2021-03-15 10:44 henry Fixed in Version => 8
2021-03-15 10:44 henry Note Added: 0011941