0003372: Some additional corrections to typos - OpenFOAM Issue Tracking

ID	Project	Category	View Status	Date Submitted	Last Update

0003372	OpenFOAM	Patch	public	2019-10-16 05:32	2019-10-18 11:58

Reporter	tniemi	Assigned To	henry
Priority	low	Severity	text	Reproducibility	always
Status	resolved	Resolution	fixed
Product Version	dev
Fixed in Version	dev

Summary	0003372: Some additional corrections to typos
Description	In my previous run with cspell I missed some files and some typos, so I decided to make one additional, more thorough run. This resulted in quite a big list of additional typos. I have attached two patches, the first one is big but all the changes are made to comments. The second patch is smaller, but contains some changes to code. However, even in these most of the changes are related to Info-messages and only couple of them are actual code pieces.
Tags	No tags attached.

tniemi 2019-10-16 05:32 reporter	typos_in_comments.diff (157,985 bytes) diff --git a/applications/solvers/combustion/PDRFoam/PDRModels/XiEqModels/basicXiSubXiEq/basicXiSubXiEq.H b/applications/solvers/combustion/PDRFoam/PDRModels/XiEqModels/basicXiSubXiEq/basicXiSubXiEq.H index 142370e64..27b8c46b8 100644 --- a/applications/solvers/combustion/PDRFoam/PDRModels/XiEqModels/basicXiSubXiEq/basicXiSubXiEq.H +++ b/applications/solvers/combustion/PDRFoam/PDRModels/XiEqModels/basicXiSubXiEq/basicXiSubXiEq.H @@ -25,7 +25,7 @@ Class Foam::XiEqModels::basicSubGrid Description - Basic sub-grid obstacle flame-wrinking enhancement factor model. + Basic sub-grid obstacle flame-wrinkling enhancement factor model. Details supplied by J Puttock 2/7/06. <b> Sub-grid flame area generation </b> @@ -119,7 +119,7 @@ public: // Member Functions - //- Return the flame-wrinking XiEq + //- Return the flame-wrinkling XiEq virtual tmp<volScalarField> XiEq() const; //- Update properties from given dictionary diff --git a/applications/solvers/combustion/PDRFoam/PDRModels/XiGModels/basicXiSubG/basicXiSubG.H b/applications/solvers/combustion/PDRFoam/PDRModels/XiGModels/basicXiSubG/basicXiSubG.H index 0610b6148..146ebfed3 100644 --- a/applications/solvers/combustion/PDRFoam/PDRModels/XiGModels/basicXiSubG/basicXiSubG.H +++ b/applications/solvers/combustion/PDRFoam/PDRModels/XiGModels/basicXiSubG/basicXiSubG.H @@ -26,7 +26,7 @@ Class Description - Basic sub-grid obstacle flame-wrinking generation rate coefficient model. + Basic sub-grid obstacle flame-wrinkling generation rate coefficient model. Details supplied by J Puttock 2/7/06. \f$ G_{sub} \f$ denotes the generation coefficient and it is given by @@ -107,7 +107,7 @@ public: // Member Functions - //- Return the flame-wrinking generation rate + //- Return the flame-wrinkling generation rate virtual tmp<volScalarField> G() const; //- Return the flame diffusivity diff --git a/applications/solvers/combustion/PDRFoam/PDRModels/turbulence/PDRkEpsilon/PDRkEpsilon.C b/applications/solvers/combustion/PDRFoam/PDRModels/turbulence/PDRkEpsilon/PDRkEpsilon.C index 862bc4738..597112996 100644 --- a/applications/solvers/combustion/PDRFoam/PDRModels/turbulence/PDRkEpsilon/PDRkEpsilon.C +++ b/applications/solvers/combustion/PDRFoam/PDRModels/turbulence/PDRkEpsilon/PDRkEpsilon.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -129,7 +129,7 @@ void PDRkEpsilon::correct() volScalarField G(GName(), rho_nut_(tgradU() && dev(twoSymm(tgradU())))); tgradU.clear(); - // Update espsilon and G at the wall + // Update epsilon and G at the wall epsilon_.boundaryFieldRef().updateCoeffs(); // Add the blockage generation term so that it is included consistently diff --git a/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/Gulder/Gulder.H b/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/Gulder/Gulder.H index dc696cf1b..db80c2029 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/Gulder/Gulder.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/Gulder/Gulder.H @@ -95,7 +95,7 @@ public: // Member Functions - //- Return the flame-wrinking XiEq + //- Return the flame-wrinkling XiEq virtual tmp<volScalarField> XiEq() const; //- Update properties from given dictionary diff --git a/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/SCOPEBlendXiEq/SCOPEBlendXiEq.H b/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/SCOPEBlendXiEq/SCOPEBlendXiEq.H index a457aa5a0..7b3a935d8 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/SCOPEBlendXiEq/SCOPEBlendXiEq.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/SCOPEBlendXiEq/SCOPEBlendXiEq.H @@ -91,7 +91,7 @@ public: // Member Functions - //- Return the flame-wrinking XiEq + //- Return the flame-wrinkling XiEq virtual tmp<volScalarField> XiEq() const; //- Update properties from given dictionary diff --git a/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/SCOPEXiEq/SCOPEXiEq.H b/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/SCOPEXiEq/SCOPEXiEq.H index e6ada0b68..47459e6ee 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/SCOPEXiEq/SCOPEXiEq.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/SCOPEXiEq/SCOPEXiEq.H @@ -109,7 +109,7 @@ public: // Member Functions - //- Return the flame-wrinking XiEq + //- Return the flame-wrinkling XiEq virtual tmp<volScalarField> XiEq() const; //- Update properties from given dictionary diff --git a/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/XiEqModel/XiEqModel.H b/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/XiEqModel/XiEqModel.H index 0d8a3afcb..1522e02af 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/XiEqModel/XiEqModel.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/XiEqModel/XiEqModel.H @@ -136,7 +136,7 @@ public: // Member Functions - //- Return the flame-wrinking XiEq + //- Return the flame-wrinkling XiEq virtual tmp<volScalarField> XiEq() const { return turbulence_.muEff(); diff --git a/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/instabilityXiEq/instabilityXiEq.H b/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/instabilityXiEq/instabilityXiEq.H index 7399ea6e8..cc8352934 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/instabilityXiEq/instabilityXiEq.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/XiEqModels/instabilityXiEq/instabilityXiEq.H @@ -90,7 +90,7 @@ public: // Member Functions - //- Return the flame-wrinking XiEq + //- Return the flame-wrinkling XiEq virtual tmp<volScalarField> XiEq() const; //- Update properties from given dictionary diff --git a/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/KTS/KTS.H b/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/KTS/KTS.H index 1a05f7e5c..8dbd61951 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/KTS/KTS.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/KTS/KTS.H @@ -25,7 +25,7 @@ Class Foam::XiGModels::KTS Description - Simple Kolmogorov time-scale (KTS) model for the flame-wrinling generation + Simple Kolmogorov time-scale (KTS) model for the flame-wrinkling generation rate. SourceFiles @@ -85,7 +85,7 @@ public: // Member Functions - //- Return the flame-wrinking generation rate + //- Return the flame-wrinkling generation rate virtual tmp<volScalarField> G() const; //- Update properties from given dictionary diff --git a/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/XiGModel/XiGModel.H b/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/XiGModel/XiGModel.H index bd398aa99..0fb6e35df 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/XiGModel/XiGModel.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/XiGModel/XiGModel.H @@ -127,7 +127,7 @@ public: // Member Functions - //- Return the flame-wrinking generation rate + //- Return the flame-wrinkling generation rate virtual tmp<volScalarField> G() const = 0; //- Return the flame diffusivity diff --git a/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/instabilityG/instabilityG.H b/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/instabilityG/instabilityG.H index 67a85fdac..263736763 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/instabilityG/instabilityG.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/XiGModels/instabilityG/instabilityG.H @@ -25,7 +25,7 @@ Class Foam::XiGModels::instabilityG Description - Flame-surface instabilityG flame-wrinking generation rate coefficient model + Flame-surface instabilityG flame-wrinkling generation rate coefficient model used in \link XiModel.H \endlink. See Technical Report SH/RE/01R for details on the PDR modelling. @@ -57,7 +57,7 @@ class instabilityG { // Private Data - //- Flame instabilityG wrinling generation rate coefficient + //- Flame instabilityG wrinkling generation rate coefficient dimensionedScalar GIn_; //- InstabilityG length-scale @@ -94,7 +94,7 @@ public: // Member Functions - //- Return the flame-wrinking generation rate + //- Return the flame-wrinkling generation rate virtual tmp<volScalarField> G() const; //- Return the flame diffusivity diff --git a/applications/solvers/combustion/PDRFoam/XiModels/XiModel/XiModel.H b/applications/solvers/combustion/PDRFoam/XiModels/XiModel/XiModel.H index d0e3381dd..0d0e6bade 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/XiModel/XiModel.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/XiModel/XiModel.H @@ -49,7 +49,7 @@ Description \f$ \Xi_{coeff} \f$ is a model constant. \f$ \Xi^* \f$ is the total equilibrium wrinkling combining the effects - of the flame inestability and turbulence interaction and is given by + of the flame instability and turbulence interaction and is given by \f[ \Xi^* = \frac {R}{R - G_\eta - G_{in}} @@ -61,7 +61,7 @@ Description interaction. \f$ G_{in} = \kappa \rho_{u}/\rho_{b} \f$ is the generation - rate due to the flame inestability. + rate due to the flame instability. By adding the removal rates of the two effects: @@ -79,7 +79,7 @@ Description \f$ \Xi_{\eta_{eq}} \f$ is the flame wrinkling due to turbulence. \f$ \Xi_{{in}_{eq}} \f$ is the equilibrium level of the flame wrinkling - generated by inestability. It is a constant (default 2.5). + generated by instability. It is a constant (default 2.5). SourceFiles @@ -122,7 +122,7 @@ protected: const volScalarField& b_; const surfaceScalarField& phi_; - //- Flame wrinking field + //- Flame wrinkling field volScalarField Xi_; @@ -199,7 +199,7 @@ public: // Member Functions - //- Return the flame-wrinking Xi + //- Return the flame-wrinkling Xi virtual const volScalarField& Xi() const { return Xi_; @@ -219,10 +219,10 @@ public: ) {} - //- Correct the flame-wrinking Xi + //- Correct the flame-wrinkling Xi virtual void correct() = 0; - //- Correct the flame-wrinking Xi using the given convection scheme + //- Correct the flame-wrinkling Xi using the given convection scheme virtual void correct(const fv::convectionScheme<scalar>&) { correct(); diff --git a/applications/solvers/combustion/PDRFoam/XiModels/algebraic/algebraic.H b/applications/solvers/combustion/PDRFoam/XiModels/algebraic/algebraic.H index ec23e5dc3..64160c1a9 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/algebraic/algebraic.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/algebraic/algebraic.H @@ -98,7 +98,7 @@ public: //- Return the flame diffusivity virtual tmp<volScalarField> Db() const; - //- Correct the flame-wrinking Xi + //- Correct the flame-wrinkling Xi virtual void correct(); //- Update properties from given dictionary diff --git a/applications/solvers/combustion/PDRFoam/XiModels/fixed/fixed.H b/applications/solvers/combustion/PDRFoam/XiModels/fixed/fixed.H index 611aeb488..933eb4431 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/fixed/fixed.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/fixed/fixed.H @@ -83,7 +83,7 @@ public: // Member Functions - //- Correct the flame-wrinking Xi + //- Correct the flame-wrinkling Xi virtual void correct() {} diff --git a/applications/solvers/combustion/PDRFoam/XiModels/transport/transport.H b/applications/solvers/combustion/PDRFoam/XiModels/transport/transport.H index 96d521d5b..3c0213388 100644 --- a/applications/solvers/combustion/PDRFoam/XiModels/transport/transport.H +++ b/applications/solvers/combustion/PDRFoam/XiModels/transport/transport.H @@ -107,13 +107,13 @@ public: fields.add(Xi_); } - //- Correct the flame-wrinking Xi + //- Correct the flame-wrinkling Xi virtual void correct() { NotImplemented; } - //- Correct the flame-wrinking Xi using the given convection scheme + //- Correct the flame-wrinkling Xi using the given convection scheme virtual void correct(const fv::convectionScheme<scalar>& mvConvection); //- Update properties from given dictionary diff --git a/applications/solvers/combustion/PDRFoam/laminarFlameSpeed/SCOPE/SCOPELaminarFlameSpeed.H b/applications/solvers/combustion/PDRFoam/laminarFlameSpeed/SCOPE/SCOPELaminarFlameSpeed.H index 473f03b7a..dad034755 100644 --- a/applications/solvers/combustion/PDRFoam/laminarFlameSpeed/SCOPE/SCOPELaminarFlameSpeed.H +++ b/applications/solvers/combustion/PDRFoam/laminarFlameSpeed/SCOPE/SCOPELaminarFlameSpeed.H @@ -30,7 +30,7 @@ Description Seven parameters are specified in terms of polynomial functions of stoichiometry. Two polynomials are fitted, covering different parts of the flammable range. If the mixture is outside the fitted range, linear - interpolation is used between the extreme of the polynomio and the upper or + interpolation is used between the extreme of the polynomial and the upper or lower flammable limit with the Markstein number constant. Variations of pressure and temperature from the reference values are taken @@ -43,7 +43,7 @@ Description where: - \f$ a_{i} \f$ are the polinomial coefficients. + \f$ a_{i} \f$ are the polynomial coefficients. \f$ pexp \f$ and \f$ texp \f$ are the pressure and temperature factors respectively. @@ -109,10 +109,10 @@ class SCOPE dictionary coeffsDict_; - //- Lower flamability limit + //- Lower flammability limit scalar LFL_; - //- Upper flamability limit + //- Upper flammability limit scalar UFL_; //- Lower Su polynomial diff --git a/applications/solvers/electromagnetics/magneticFoam/magnet.H b/applications/solvers/electromagnetics/magneticFoam/magnet.H index e8cff9578..9612f3e6a 100644 --- a/applications/solvers/electromagnetics/magneticFoam/magnet.H +++ b/applications/solvers/electromagnetics/magneticFoam/magnet.H @@ -114,7 +114,7 @@ public: return relativePermeability_; } - //- Return remenence + //- Return remanence inline const dimensionedScalar& Mr() const { return remanence_; diff --git a/applications/solvers/lagrangian/sprayFoam/engineFoam/startSummary.H b/applications/solvers/lagrangian/sprayFoam/engineFoam/startSummary.H index 3ee56bcfa..f79076d41 100644 --- a/applications/solvers/lagrangian/sprayFoam/engineFoam/startSummary.H +++ b/applications/solvers/lagrangian/sprayFoam/engineFoam/startSummary.H @@ -1,6 +1,6 @@ Info<< "Total cylinder mass: " << fvc::domainIntegrate(rho).value() << endl; //Info<< "Total fuel mass: " -// << fvc::domainIntegrate(rhocompostion.ft()).value() << endl; +// << fvc::domainIntegrate(rhocomposition.ft()).value() << endl; OFstream logSummaryFile ( diff --git a/applications/solvers/multiphase/multiphaseEulerFoam/interfacialModels/dragModels/dragModel/dragModel.H b/applications/solvers/multiphase/multiphaseEulerFoam/interfacialModels/dragModels/dragModel/dragModel.H index c9163bbae..70a359d56 100644 --- a/applications/solvers/multiphase/multiphaseEulerFoam/interfacialModels/dragModels/dragModel/dragModel.H +++ b/applications/solvers/multiphase/multiphaseEulerFoam/interfacialModels/dragModels/dragModel/dragModel.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -134,7 +134,7 @@ public: // ******************************** NB! *************************** // for numerical reasons alpha1 and alpha2 has been // extracted from the dragFunction K, - // so you MUST divide K by alpha1alpha2 when implemnting the drag + // so you MUST divide K by alpha1alpha2 when implementing the drag // function // ******************************** NB! *************************** virtual tmp<volScalarField> K(const volScalarField& Ur) const = 0; diff --git a/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/alphatWallBoilingWallFunction/alphatWallBoilingWallFunctionFvPatchScalarField.H b/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/alphatWallBoilingWallFunction/alphatWallBoilingWallFunctionFvPatchScalarField.H index 632e9d660..d5ebbd5fa 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/alphatWallBoilingWallFunction/alphatWallBoilingWallFunctionFvPatchScalarField.H +++ b/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/alphatWallBoilingWallFunction/alphatWallBoilingWallFunctionFvPatchScalarField.H @@ -26,7 +26,7 @@ Class Description A thermal wall function for simulation of subcooled nucleate wall boiling - with runtime selctable submodels for: + with runtime selectable submodels for: - wall heat flux partitioning model - nucleation site density - bubble departure frequency @@ -86,7 +86,7 @@ Usage departureFreqModel\| \| yes \| \endtable - NOTE: Runtime selectabale submodels may require model specific entries + NOTE: Runtime selectable submodels may require model specific entries Example usage: \verbatim diff --git a/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/departureDiameterModels/departureDiameterModel/departureDiameterModel.H b/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/departureDiameterModels/departureDiameterModel/departureDiameterModel.H index b848745b9..9cb8110c2 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/departureDiameterModels/departureDiameterModel/departureDiameterModel.H +++ b/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/departureDiameterModels/departureDiameterModel/departureDiameterModel.H @@ -29,7 +29,7 @@ Description SourceFiles departureDiameterModel.C - newdepartureDiameterModel.C + newDepartureDiameterModel.C \---------------------------------------------------------------------------/ diff --git a/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/departureFrequencyModels/departureFrequencyModel/departureFrequencyModel.H b/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/departureFrequencyModels/departureFrequencyModel/departureFrequencyModel.H index 2593b6a62..7e3a8a7a8 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/departureFrequencyModels/departureFrequencyModel/departureFrequencyModel.H +++ b/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/departureFrequencyModels/departureFrequencyModel/departureFrequencyModel.H @@ -29,7 +29,7 @@ Description SourceFiles departureFrequencyModel.C - newdepartureFrequencyModel.C + newDepartureFrequencyModel.C \---------------------------------------------------------------------------/ diff --git a/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/nucleationSiteModels/nucleationSiteModel/nucleationSiteModel.H b/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/nucleationSiteModels/nucleationSiteModel/nucleationSiteModel.H index e7b60de19..b50fa38c8 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/nucleationSiteModels/nucleationSiteModel/nucleationSiteModel.H +++ b/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/nucleationSiteModels/nucleationSiteModel/nucleationSiteModel.H @@ -29,7 +29,7 @@ Description SourceFiles nucleationSiteModel.C - newnucleationSiteModel.C + newNucleationSiteModel.C \---------------------------------------------------------------------------/ diff --git a/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/partitioningModels/partitioningModel/partitioningModel.H b/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/partitioningModels/partitioningModel/partitioningModel.H index 4add5bade..1d60e8022 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/partitioningModels/partitioningModel/partitioningModel.H +++ b/applications/solvers/multiphase/reactingEulerFoam/derivedFvPatchFields/wallBoilingSubModels/partitioningModels/partitioningModel/partitioningModel.H @@ -29,7 +29,7 @@ Description SourceFiles partitioningModel.C - newpartitioningModel.C + newPartitioningModel.C \---------------------------------------------------------------------------/ diff --git a/applications/solvers/multiphase/reactingEulerFoam/functionObjects/sizeDistribution/sizeDistribution.H b/applications/solvers/multiphase/reactingEulerFoam/functionObjects/sizeDistribution/sizeDistribution.H index 8379fc08c..cc88e045f 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/functionObjects/sizeDistribution/sizeDistribution.H +++ b/applications/solvers/multiphase/reactingEulerFoam/functionObjects/sizeDistribution/sizeDistribution.H @@ -146,7 +146,7 @@ protected: //- Abscissa type coordinateType coordinateType_; - //- List of volume-averaged number concentations + //- List of volume-averaged number concentrations scalarField N_; //- List of volume-averaged surface areas @@ -167,7 +167,7 @@ protected: //- Highest moment order label maxOrder_; - //- Bins (respresentative volume/area/diameter) + //- Bins (representative volume/area/diameter) pointField bins_; //- Bin component used according to chosen coordinate type diff --git a/applications/solvers/multiphase/reactingEulerFoam/interfacialCompositionModels/interfaceCompositionModels/nonRandomTwoLiquid/nonRandomTwoLiquid.H b/applications/solvers/multiphase/reactingEulerFoam/interfacialCompositionModels/interfaceCompositionModels/nonRandomTwoLiquid/nonRandomTwoLiquid.H index 084a3854d..5503d158f 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/interfacialCompositionModels/interfaceCompositionModels/nonRandomTwoLiquid/nonRandomTwoLiquid.H +++ b/applications/solvers/multiphase/reactingEulerFoam/interfacialCompositionModels/interfaceCompositionModels/nonRandomTwoLiquid/nonRandomTwoLiquid.H @@ -75,10 +75,10 @@ class nonRandomTwoLiquid //- Name of species 2 word species2Name_; - //- Indiex of species 1 within this thermo + //- Index of species 1 within this thermo label species1Index_; - //- Indiex of species 2 within this thermo + //- Index of species 2 within this thermo label species2Index_; //- Non-randomness constant parameter for species 1 diff --git a/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/diameterModels/linearTsubDiameter/linearTsubDiameter.H b/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/diameterModels/linearTsubDiameter/linearTsubDiameter.H index e24c49550..76863b296 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/diameterModels/linearTsubDiameter/linearTsubDiameter.H +++ b/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/diameterModels/linearTsubDiameter/linearTsubDiameter.H @@ -71,13 +71,13 @@ class linearTsub //- Reference diameter for low subcooling temperature dimensionedScalar d2_; - //- Subcooling temperature where low subcooling diamter is reached + //- Subcooling temperature where low subcooling diameter is reached dimensionedScalar Tsub2_; //- Reference diameter for high subcooling temperature dimensionedScalar d1_; - //- Subcooling temperature where high subcooling diamter is reached + //- Subcooling temperature where high subcooling diameter is reached dimensionedScalar Tsub1_; //- Diameter field diff --git a/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/diameterModels/velocityGroup/sizeGroup/shapeModels/fractal/sinteringModels/sinteringModel/sinteringModel.H b/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/diameterModels/velocityGroup/sizeGroup/shapeModels/fractal/sinteringModels/sinteringModel/sinteringModel.H index e186b1484..e3d286e14 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/diameterModels/velocityGroup/sizeGroup/shapeModels/fractal/sinteringModels/sinteringModel/sinteringModel.H +++ b/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/diameterModels/velocityGroup/sizeGroup/shapeModels/fractal/sinteringModels/sinteringModel/sinteringModel.H @@ -30,7 +30,6 @@ Description SourceFiles sinteringModel.C - newsinteringModel.C \---------------------------------------------------------------------------/ diff --git a/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/phaseModel/MovingPhaseModel/MovingPhaseModel.H b/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/phaseModel/MovingPhaseModel/MovingPhaseModel.H index e8a4f273f..546b62da3 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/phaseModel/MovingPhaseModel/MovingPhaseModel.H +++ b/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/phaseModel/MovingPhaseModel/MovingPhaseModel.H @@ -30,7 +30,7 @@ Description quite restrictive as it also has to support an equivalent stationary model, which does not store motion fields or a turbulence model. - Possible future extensions include separating the turbulent fuctionality + Possible future extensions include separating the turbulent functionality into another layer. See also diff --git a/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/phaseModel/StationaryPhaseModel/StationaryPhaseModel.H b/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/phaseModel/StationaryPhaseModel/StationaryPhaseModel.H index 641ad51bc..6279e0cef 100644 --- a/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/phaseModel/StationaryPhaseModel/StationaryPhaseModel.H +++ b/applications/solvers/multiphase/reactingEulerFoam/phaseSystems/phaseModel/StationaryPhaseModel/StationaryPhaseModel.H @@ -27,7 +27,7 @@ Class Description Class which represents a stationary (and therefore probably solid) phase. Generates, but does not store, zero velocity and flux field and turbulent - qauantities. Throws an error when non-const access is requested to the + quantities. Throws an error when non-const access is requested to the motion fields or when the momentum equation is requested. Usage must must protect against such calls. diff --git a/applications/utilities/mesh/conversion/sammToFoam/calcPointCells.C b/applications/utilities/mesh/conversion/sammToFoam/calcPointCells.C index fa89f64c3..59aef9d6f 100644 --- a/applications/utilities/mesh/conversion/sammToFoam/calcPointCells.C +++ b/applications/utilities/mesh/conversion/sammToFoam/calcPointCells.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -64,7 +64,7 @@ void Foam::sammMesh::calcPointCells() const // the supporting point labels, we need to work based on the cell faces. // This is because some of the faces for meshes with arbitrary interfaces // do not come from the cell shape, but from the slaves of the coupled - // match. It is also adventageous to remove the duplicates from the + // match. It is also advantageous to remove the duplicates from the // point-cell addressing, because this removes a lot of waste later. // diff --git a/applications/utilities/mesh/conversion/sammToFoam/readCells.C b/applications/utilities/mesh/conversion/sammToFoam/readCells.C index b1830f35d..30ffd2a0d 100644 --- a/applications/utilities/mesh/conversion/sammToFoam/readCells.C +++ b/applications/utilities/mesh/conversion/sammToFoam/readCells.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -37,7 +37,7 @@ void Foam::sammMesh::addRegularCell const label nCreatedCells ) { - // Momory management + // Memory management static labelList labelsHex(8); static labelList labelsWedge(7); static labelList labelsPrism(6); diff --git a/applications/utilities/mesh/conversion/sammToFoam/sammMesh.H b/applications/utilities/mesh/conversion/sammToFoam/sammMesh.H index 376d22f08..79cc77732 100644 --- a/applications/utilities/mesh/conversion/sammToFoam/sammMesh.H +++ b/applications/utilities/mesh/conversion/sammToFoam/sammMesh.H @@ -27,7 +27,7 @@ Class Description A messy mesh class which supports the possibility of creating a shapeMesh for regular Samm meshes (no arbitrary interfaces or collapsed SAMM cells). - If any of these special feateres exist, the mesh is created as polyMesh + If any of these special features exist, the mesh is created as polyMesh SourceFiles sammMesh.C diff --git a/applications/utilities/mesh/conversion/star3ToFoam/calcPointCells.C b/applications/utilities/mesh/conversion/star3ToFoam/calcPointCells.C index 708c1a654..ccd71f673 100644 --- a/applications/utilities/mesh/conversion/star3ToFoam/calcPointCells.C +++ b/applications/utilities/mesh/conversion/star3ToFoam/calcPointCells.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -64,7 +64,7 @@ void Foam::starMesh::calcPointCells() const // the supporting point labels, we need to work based on the cell faces. // This is because some of the faces for meshes with arbitrary interfaces // do not come from the cell shape, but from the slaves of the coupled - // match. It is also adventageous to remove the duplicates from the + // match. It is also advantageous to remove the duplicates from the // point-cell addressing, because this removes a lot of waste later. // diff --git a/applications/utilities/mesh/conversion/star3ToFoam/createBoundaryFaces.C b/applications/utilities/mesh/conversion/star3ToFoam/createBoundaryFaces.C index 9594a214b..4b68ccbe4 100644 --- a/applications/utilities/mesh/conversion/star3ToFoam/createBoundaryFaces.C +++ b/applications/utilities/mesh/conversion/star3ToFoam/createBoundaryFaces.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -31,7 +31,7 @@ Description // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // // Specialist version of face comparison to deal with -// PROSTAR boundary format idiosyncracies +// PROSTAR boundary format idiosyncrasies bool Foam::starMesh::starEqualFace ( const face& boundaryFace, diff --git a/applications/utilities/mesh/conversion/star3ToFoam/createCoupleMatches.C b/applications/utilities/mesh/conversion/star3ToFoam/createCoupleMatches.C index 6421b3434..17c9069a2 100644 --- a/applications/utilities/mesh/conversion/star3ToFoam/createCoupleMatches.C +++ b/applications/utilities/mesh/conversion/star3ToFoam/createCoupleMatches.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -993,7 +993,7 @@ void Foam::starMesh::createCoupleMatches() // list of edges to consider. Make sure all edges are // added such that the current point is their start. // Loop through all edges to consider and find the one - // which produces the buggest right-hand-turn. This + // which produces the biggest right-hand-turn. This // is the next edge to be added to the face. If its // end is the same as the starting point, the face is // complete; resize it to the number of active points diff --git a/applications/utilities/mesh/conversion/star3ToFoam/readCells.C b/applications/utilities/mesh/conversion/star3ToFoam/readCells.C index 506d8e26d..d793572ac 100644 --- a/applications/utilities/mesh/conversion/star3ToFoam/readCells.C +++ b/applications/utilities/mesh/conversion/star3ToFoam/readCells.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -37,7 +37,7 @@ void Foam::starMesh::addRegularCell const label nCreatedCells ) { - // Momory management + // Memory management static labelList labelsHex(8); static labelList labelsPrism(6); static labelList labelsPyramid(5); diff --git a/applications/utilities/mesh/conversion/star3ToFoam/starMesh.H b/applications/utilities/mesh/conversion/star3ToFoam/starMesh.H index 17fa8538c..b4de9f86e 100644 --- a/applications/utilities/mesh/conversion/star3ToFoam/starMesh.H +++ b/applications/utilities/mesh/conversion/star3ToFoam/starMesh.H @@ -27,7 +27,7 @@ Class Description A messy mesh class which supports the possibility of creating a shapeMesh for regular Star meshes (no arbitrary interfaces or collapsed SAMM cells). - If any of these special feateres exist, the mesh is created as polyMesh + If any of these special features exist, the mesh is created as polyMesh SourceFiles calcPointCells.C diff --git a/applications/utilities/mesh/generation/extrude/extrudeToRegionMesh/extrudeToRegionMesh.C b/applications/utilities/mesh/generation/extrude/extrudeToRegionMesh/extrudeToRegionMesh.C index 7d01c7997..cc600b06c 100644 --- a/applications/utilities/mesh/generation/extrude/extrudeToRegionMesh/extrudeToRegionMesh.C +++ b/applications/utilities/mesh/generation/extrude/extrudeToRegionMesh/extrudeToRegionMesh.C @@ -709,7 +709,7 @@ void countExtrudePatches } } } - // Synchronise decistion. Actual numbers are not important, just make + // Synchronise decision. Actual numbers are not important, just make // sure that they're > 0 on all processors. Pstream::listCombineGather(zoneSidePatch, plusEqOp<label>()); Pstream::listCombineScatter(zoneSidePatch); @@ -2381,7 +2381,7 @@ int main(int argc, char argv[]) meshMod ); - // Enforce actual point posititions according to extrudeModel (model) + // Enforce actual point positions according to extrudeModel (model) // (extruder.setRefinement only does fixed expansionRatio) // The regionPoints and nLayers are looped in the same way as in // createShellMesh diff --git a/applications/utilities/mesh/generation/foamyMesh/conformalVoronoi2DMesh/cv2DControls/cv2DControls.H b/applications/utilities/mesh/generation/foamyMesh/conformalVoronoi2DMesh/cv2DControls/cv2DControls.H index 4e3cb5e7a..7964f0e67 100644 --- a/applications/utilities/mesh/generation/foamyMesh/conformalVoronoi2DMesh/cv2DControls/cv2DControls.H +++ b/applications/utilities/mesh/generation/foamyMesh/conformalVoronoi2DMesh/cv2DControls/cv2DControls.H @@ -69,8 +69,8 @@ public: // Controls - //- Minimum cell size below which protusions through the surface are - // not split + //- Minimum cell size below which protrusions through the surface + // are not split scalar minCellSize_; //- Square of minCellSize @@ -114,14 +114,14 @@ public: //- Square of span scalar span2_; - //- Minimum edge-length of the cell size below which protusions + //- Minimum edge-length of the cell size below which protrusions // through the surface are not split scalar minEdgeLen_; //- Square of minEdgeLen scalar minEdgeLen2_; - //- Maximum notch size below which protusions into the surface are + //- Maximum notch size below which protrusions into the surface are // not filled scalar maxNotchLen_; diff --git a/applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/conformalVoronoiMesh/conformalVoronoiMesh.H b/applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/conformalVoronoiMesh/conformalVoronoiMesh.H index f08886089..730e662e8 100644 --- a/applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/conformalVoronoiMesh/conformalVoronoiMesh.H +++ b/applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/conformalVoronoiMesh/conformalVoronoiMesh.H @@ -456,7 +456,7 @@ private: //- Return false if the line is entirely outside the current processor // domain, true is either point is inside, or the processor domain - // bounadry is intersected (i.e. the points are box outside but the + // boundary is intersected (i.e. the points are box outside but the // line cuts. The points will be moved onto the box where they // intersect. bool clipLineToProc diff --git a/applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/autoDensity/autoDensity.C b/applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/autoDensity/autoDensity.C index 78235626f..c87df18f2 100644 --- a/applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/autoDensity/autoDensity.C +++ b/applications/utilities/mesh/generation/foamyMesh/conformalVoronoiMesh/initialPointsMethod/autoDensity/autoDensity.C @@ -636,7 +636,7 @@ bool Foam::autoDensity::fillBox } // Using the sampledPoints as the first test locations as they are - // randomly shuffled, but unfiormly sampling space and have wellInside + // randomly shuffled, but uniformly sampling space and have wellInside // and size data already maxDensity = 1/pow3(max(minCellSize, small)); diff --git a/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.C b/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.C index 1568ff7bd..7fba200b3 100644 --- a/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.C +++ b/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2013-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2013-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -773,7 +773,7 @@ void Foam::CV2D::newPoints() if (!is_infinite(ec)) break; } while (++ec != ecStart); - // Store the start-end of the first non-infinte edge + // Store the start-end of the first non-infinite edge point2D de0 = toPoint2D(circumcenter(ec->first)); // Keep track of the maximum edge length^2 diff --git a/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.H b/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.H index a84b397ee..301a74980 100644 --- a/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.H +++ b/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/CV2D.H @@ -68,7 +68,7 @@ Description randomiseInitialGrid yes; // Perturbation fraction, 1 = cell-size. - randomPurturbation 0.1; + randomPerturbation 0.1; // Number of relaxation iterations. nIterations 5; diff --git a/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/indexedVertex.H b/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/indexedVertex.H index 823059837..16a24e2d1 100644 --- a/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/indexedVertex.H +++ b/applications/utilities/mesh/generation/foamyMesh/foamyQuadMesh/indexedVertex.H @@ -169,14 +169,14 @@ public: // Friend Functions - //- Do the two given vertices consitute a boundary point-pair + //- Do the two given vertices constitute a boundary point-pair friend bool pointPair <Gt, Vb> ( const indexedVertex<Gt, Vb>& v0, const indexedVertex<Gt, Vb>& v1 ); - //- Do the three given vertices consitute a boundary triangle + //- Do the three given vertices constitute a boundary triangle friend bool boundaryTriangle <Gt, Vb> ( const indexedVertex<Gt, Vb>& v0, @@ -184,7 +184,7 @@ public: const indexedVertex<Gt, Vb>& v2 ); - //- Do the three given vertices consitute an outside triangle + //- Do the three given vertices constitute an outside triangle friend bool outsideTriangle <Gt, Vb> ( const indexedVertex<Gt, Vb>& v0, diff --git a/applications/utilities/mesh/manipulation/polyDualMesh/meshDualiser.C b/applications/utilities/mesh/manipulation/polyDualMesh/meshDualiser.C index 0023cd90f..85799d282 100644 --- a/applications/utilities/mesh/manipulation/polyDualMesh/meshDualiser.C +++ b/applications/utilities/mesh/manipulation/polyDualMesh/meshDualiser.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -1142,7 +1142,7 @@ void Foam::meshDualiser::setRefinement ); } // Detect whether different dual cells on either side of a face. This - // would neccesitate having a dual face built from the face and thus a + // would necessitate having a dual face built from the face and thus a // dual point at the face centre. for (label facei = 0; facei < mesh_.nInternalFaces(); facei++) { @@ -1189,7 +1189,7 @@ void Foam::meshDualiser::setRefinement } // Detect whether different dual cells on either side of an edge. This - // would neccesitate having a dual face built perpendicular to the edge + // would necessitate having a dual face built perpendicular to the edge // and thus a dual point at the mid of the edge. // Note: not really true - the face can be built without the edge centre! const labelListList& edgeCells = mesh_.edgeCells(); diff --git a/applications/utilities/postProcessing/graphics/PVReaders/vtkPVblockMesh/vtkPVblockMesh.H b/applications/utilities/postProcessing/graphics/PVReaders/vtkPVblockMesh/vtkPVblockMesh.H index da733bdd6..8bf0749bd 100644 --- a/applications/utilities/postProcessing/graphics/PVReaders/vtkPVblockMesh/vtkPVblockMesh.H +++ b/applications/utilities/postProcessing/graphics/PVReaders/vtkPVblockMesh/vtkPVblockMesh.H @@ -185,7 +185,7 @@ class vtkPVblockMesh //- Selected curved edges boolList edgeStatus_; - //- First instance and size of bleckMesh blocks + //- First instance and size of blockMesh blocks // used to index into blockStatus_ arrayRange arrayRangeBlocks_; diff --git a/applications/utilities/preProcessing/wallFunctionTable/tabulatedWallFunction/tabulatedWallFunction/tabulatedWallFunction.H b/applications/utilities/preProcessing/wallFunctionTable/tabulatedWallFunction/tabulatedWallFunction/tabulatedWallFunction.H index e80e4531f..ac3b0b174 100644 --- a/applications/utilities/preProcessing/wallFunctionTable/tabulatedWallFunction/tabulatedWallFunction/tabulatedWallFunction.H +++ b/applications/utilities/preProcessing/wallFunctionTable/tabulatedWallFunction/tabulatedWallFunction/tabulatedWallFunction.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -56,7 +56,7 @@ class tabulatedWallFunction { protected: - // Proteced data + // Protected data //- Main dictionary const dictionary dict_; diff --git a/applications/utilities/thermophysical/chemkinToFoam/chemkinReader/chemkinReader.C b/applications/utilities/thermophysical/chemkinToFoam/chemkinReader/chemkinReader.C index d3596895e..f667a1162 100644 --- a/applications/utilities/thermophysical/chemkinToFoam/chemkinReader/chemkinReader.C +++ b/applications/utilities/thermophysical/chemkinToFoam/chemkinReader/chemkinReader.C @@ -446,7 +446,7 @@ void Foam::chemkinReader::addReaction // Calculate the unit conversion factor for the A coefficient - // for the change from mol/cm^3 to kmol/m^3 concentraction units + // for the change from mol/cm^3 to kmol/m^3 concentration units const scalar concFactor = 0.001; scalar sumExp = 0.0; forAll(lhs, i) diff --git a/etc/caseDicts/annotated/foamyHexMeshDict b/etc/caseDicts/annotated/foamyHexMeshDict index 9d657eb58..a5a0811f8 100644 --- a/etc/caseDicts/annotated/foamyHexMeshDict +++ b/etc/caseDicts/annotated/foamyHexMeshDict @@ -118,7 +118,7 @@ surfaceConformation // Maximum allowable protrusion through the surface before // conformation points are added - fraction of the local target - // cell size. These small protusions are (hopefully) done by mesh filtering + // cell size. These small protrusions are (hopefully) done by mesh filtering // instead. maxSurfaceProtrusionCoeff 0.1; diff --git a/src/ODE/ODESolvers/ODESolver/ODESolver.H b/src/ODE/ODESolvers/ODESolver/ODESolver.H index 3450c3b19..1f18e2688 100644 --- a/src/ODE/ODESolvers/ODESolver/ODESolver.H +++ b/src/ODE/ODESolvers/ODESolver/ODESolver.H @@ -76,7 +76,7 @@ protected: // Protected Member Functions - //- Return the nomalized scalar error + //- Return the normalized scalar error scalar normalizeError ( const scalarField& y0, diff --git a/src/ODE/ODESolvers/adaptiveSolver/adaptiveSolver.H b/src/ODE/ODESolvers/adaptiveSolver/adaptiveSolver.H index 77433c727..bdbad7e9e 100644 --- a/src/ODE/ODESolvers/adaptiveSolver/adaptiveSolver.H +++ b/src/ODE/ODESolvers/adaptiveSolver/adaptiveSolver.H @@ -55,7 +55,7 @@ class adaptiveSolver //- Cache for dydx at the initial time mutable scalarField dydx0_; - //- Temprorary for the test-step solution + //- Temporary for the test-step solution mutable scalarField yTemp_; diff --git a/src/OpenFOAM/algorithms/dynamicIndexedOctree/dynamicIndexedOctree.H b/src/OpenFOAM/algorithms/dynamicIndexedOctree/dynamicIndexedOctree.H index 1e16736a5..25c1ba07b 100644 --- a/src/OpenFOAM/algorithms/dynamicIndexedOctree/dynamicIndexedOctree.H +++ b/src/OpenFOAM/algorithms/dynamicIndexedOctree/dynamicIndexedOctree.H @@ -128,7 +128,7 @@ private: // Static data - //- Relative peturbation tolerance. Determines when point is + //- Relative perturbation tolerance. Determines when point is // considered to be close to face/edge of bb of node. // The tolerance is relative to the bounding box of the smallest // node. diff --git a/src/OpenFOAM/containers/Lists/ListOps/ListOps.H b/src/OpenFOAM/containers/Lists/ListOps/ListOps.H index 8ebe577a7..055b15a9a 100644 --- a/src/OpenFOAM/containers/Lists/ListOps/ListOps.H +++ b/src/OpenFOAM/containers/Lists/ListOps/ListOps.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -21,7 +21,7 @@ License You should have received a copy of the GNU General Public License along with OpenFOAM. If not, see <http://www.gnu.org/licenses/>. -InNamspace +InNamespace Foam Description diff --git a/src/OpenFOAM/db/IOstreams/Pstreams/UPstream.H b/src/OpenFOAM/db/IOstreams/Pstreams/UPstream.H index d87448e08..3bc4fa20a 100644 --- a/src/OpenFOAM/db/IOstreams/Pstreams/UPstream.H +++ b/src/OpenFOAM/db/IOstreams/Pstreams/UPstream.H @@ -346,7 +346,7 @@ public: }; //- Return physical processor number (i.e. processor number in - // worldComm) given communicator and procssor + // worldComm) given communicator and processor static int baseProcNo(const label myComm, const int procID); //- Return processor number in communicator (given physical processor diff --git a/src/OpenFOAM/global/fileOperations/fileOperation/fileOperation.C b/src/OpenFOAM/global/fileOperations/fileOperation/fileOperation.C index 9254b1465..88be4bc50 100644 --- a/src/OpenFOAM/global/fileOperations/fileOperation/fileOperation.C +++ b/src/OpenFOAM/global/fileOperations/fileOperation/fileOperation.C @@ -1119,7 +1119,7 @@ Foam::label Foam::fileOperation::splitProcessorPath if (f.size() && f[0] == 's') { - // "processsorsNNN" + // "processorsNNN" f = f.substr(1); diff --git a/src/OpenFOAM/global/fileOperations/fileOperation/fileOperation.H b/src/OpenFOAM/global/fileOperations/fileOperation/fileOperation.H index 0bee4bafa..3480c92af 100644 --- a/src/OpenFOAM/global/fileOperations/fileOperation/fileOperation.H +++ b/src/OpenFOAM/global/fileOperations/fileOperation/fileOperation.H @@ -312,7 +312,7 @@ public: // ) const = 0; - // (reg)IOobject functinality + // (reg)IOobject functionality //- Generate disk file name for object. Opposite of filePath. // Optional wanted typeName. @@ -494,7 +494,7 @@ public: virtual void flush() const; //- Generate path (like io.path) from root+casename with any - // 'processorXXX' replaced by procDir (usually 'processsors') + // 'processorXXX' replaced by procDir (usually 'processors') fileName processorsCasePath ( const IOobject&, @@ -502,7 +502,7 @@ public: ) const; //- Generate path (like io.path) with provided instance and any - // 'processorXXX' replaced by procDir (usually 'processsors') + // 'processorXXX' replaced by procDir (usually 'processors') fileName processorsPath ( const IOobject&, diff --git a/src/OpenFOAM/global/fileOperations/masterUncollatedFileOperation/masterUncollatedFileOperation.H b/src/OpenFOAM/global/fileOperations/masterUncollatedFileOperation/masterUncollatedFileOperation.H index 158e1ed31..e36133edb 100644 --- a/src/OpenFOAM/global/fileOperations/masterUncollatedFileOperation/masterUncollatedFileOperation.H +++ b/src/OpenFOAM/global/fileOperations/masterUncollatedFileOperation/masterUncollatedFileOperation.H @@ -641,7 +641,7 @@ public: // ) const; - // (reg)IOobject functinality + // (reg)IOobject functionality //- Search for an object. checkGlobal : also check undecomposed case virtual fileName filePath diff --git a/src/OpenFOAM/global/fileOperations/uncollatedFileOperation/uncollatedFileOperation.C b/src/OpenFOAM/global/fileOperations/uncollatedFileOperation/uncollatedFileOperation.C index 4f8a870e6..46456a9e6 100644 --- a/src/OpenFOAM/global/fileOperations/uncollatedFileOperation/uncollatedFileOperation.C +++ b/src/OpenFOAM/global/fileOperations/uncollatedFileOperation/uncollatedFileOperation.C @@ -108,7 +108,7 @@ Foam::fileName Foam::fileOperations::uncollatedFileOperation::filePathInfo } } - // Check if parallel "procesors" directory + // Check if parallel "processors" directory if (io.time().processorCase()) { tmpNrc<dirIndexList> pDirs diff --git a/src/OpenFOAM/global/fileOperations/uncollatedFileOperation/uncollatedFileOperation.H b/src/OpenFOAM/global/fileOperations/uncollatedFileOperation/uncollatedFileOperation.H index 9018bdbe4..1545a2c11 100644 --- a/src/OpenFOAM/global/fileOperations/uncollatedFileOperation/uncollatedFileOperation.H +++ b/src/OpenFOAM/global/fileOperations/uncollatedFileOperation/uncollatedFileOperation.H @@ -207,7 +207,7 @@ public: // ) const; - // (reg)IOobject functinality + // (reg)IOobject functionality //- Search for an object. checkGlobal : also check undecomposed case virtual fileName filePath diff --git a/src/OpenFOAM/matrices/LduMatrix/LduMatrix/LduMatrixATmul.C b/src/OpenFOAM/matrices/LduMatrix/LduMatrix/LduMatrixATmul.C index 766aa9d39..a8c2e8e57 100644 --- a/src/OpenFOAM/matrices/LduMatrix/LduMatrix/LduMatrixATmul.C +++ b/src/OpenFOAM/matrices/LduMatrix/LduMatrix/LduMatrixATmul.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -235,7 +235,7 @@ void Foam::LduMatrix<Type, DType, LUType>::residual // Parallel boundary initialisation. // Note: there is a change of sign in the coupled - // interface update to add the contibution to the r.h.s. + // interface update to add the contribution to the r.h.s. FieldField<Field, LUType> mBouCoeffs(interfacesUpper_.size()); diff --git a/src/OpenFOAM/matrices/LduMatrix/Smoothers/GaussSeidel/TGaussSeidelSmoother.C b/src/OpenFOAM/matrices/LduMatrix/Smoothers/GaussSeidel/TGaussSeidelSmoother.C index 70a318207..3f907b5ff 100644 --- a/src/OpenFOAM/matrices/LduMatrix/Smoothers/GaussSeidel/TGaussSeidelSmoother.C +++ b/src/OpenFOAM/matrices/LduMatrix/Smoothers/GaussSeidel/TGaussSeidelSmoother.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -89,7 +89,7 @@ void Foam::TGaussSeidelSmoother<Type, DType, LUType>::smooth // Parallel boundary initialisation. The parallel boundary is treated // as an effective jacobi interface in the boundary. // Note: there is a change of sign in the coupled - // interface update to add the contibution to the r.h.s. + // interface update to add the contribution to the r.h.s. FieldField<Field, LUType> mBouCoeffs(matrix_.interfacesUpper().size()); diff --git a/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/eagerGAMGProcAgglomeration/eagerGAMGProcAgglomeration.C b/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/eagerGAMGProcAgglomeration/eagerGAMGProcAgglomeration.C index ef9db4e26..f48f24954 100644 --- a/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/eagerGAMGProcAgglomeration/eagerGAMGProcAgglomeration.C +++ b/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/eagerGAMGProcAgglomeration/eagerGAMGProcAgglomeration.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2013-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2013-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -136,7 +136,7 @@ bool Foam::eagerGAMGProcAgglomeration::agglomerate() ) ); - // Use procesor agglomeration maps to do the actual + // Use processor agglomeration maps to do the actual // collecting. if (Pstream::myProcNo(levelComm) != -1) { diff --git a/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/manualGAMGProcAgglomeration/manualGAMGProcAgglomeration.C b/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/manualGAMGProcAgglomeration/manualGAMGProcAgglomeration.C index 8945410ab..b58081fcd 100644 --- a/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/manualGAMGProcAgglomeration/manualGAMGProcAgglomeration.C +++ b/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/manualGAMGProcAgglomeration/manualGAMGProcAgglomeration.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2013-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2013-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -183,7 +183,7 @@ bool Foam::manualGAMGProcAgglomeration::agglomerate() ) ); - // Use procesor agglomeration maps to do the actual + // Use processor agglomeration maps to do the actual // collecting if (Pstream::myProcNo(levelMesh.comm()) != -1) { diff --git a/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/masterCoarsestGAMGProcAgglomeration/masterCoarsestGAMGProcAgglomeration.C b/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/masterCoarsestGAMGProcAgglomeration/masterCoarsestGAMGProcAgglomeration.C index 56c666c0a..d59d502ab 100644 --- a/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/masterCoarsestGAMGProcAgglomeration/masterCoarsestGAMGProcAgglomeration.C +++ b/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/masterCoarsestGAMGProcAgglomeration/masterCoarsestGAMGProcAgglomeration.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2013-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2013-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -123,7 +123,7 @@ bool Foam::masterCoarsestGAMGProcAgglomeration::agglomerate() ) ); - // Use procesor agglomeration maps to do the actual collecting. + // Use processor agglomeration maps to do the actual collecting. if (Pstream::myProcNo(levelComm) != -1) { GAMGProcAgglomeration::agglomerate diff --git a/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/procFacesGAMGProcAgglomeration/procFacesGAMGProcAgglomeration.C b/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/procFacesGAMGProcAgglomeration/procFacesGAMGProcAgglomeration.C index 88d256f37..b0ada9c3e 100644 --- a/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/procFacesGAMGProcAgglomeration/procFacesGAMGProcAgglomeration.C +++ b/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/GAMGProcAgglomerations/procFacesGAMGProcAgglomeration/procFacesGAMGProcAgglomeration.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2013-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2013-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -303,7 +303,7 @@ bool Foam::procFacesGAMGProcAgglomeration::agglomerate() ); - // Use procesor agglomeration maps to do the actual + // Use processor agglomeration maps to do the actual // collecting. GAMGProcAgglomeration::agglomerate ( diff --git a/src/OpenFOAM/meshes/lduMesh/lduPrimitiveMesh.C b/src/OpenFOAM/meshes/lduMesh/lduPrimitiveMesh.C index 257b089c6..3c0c9c509 100644 --- a/src/OpenFOAM/meshes/lduMesh/lduPrimitiveMesh.C +++ b/src/OpenFOAM/meshes/lduMesh/lduPrimitiveMesh.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2013-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2013-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -384,7 +384,7 @@ Foam::lduPrimitiveMesh::lduPrimitiveMesh const lduInterfacePtrsList interfaces = mesh(myMesh, otherMeshes, procMeshI).interfaces(); - // Inialise all boundaries as merged + // Initialise all boundaries as merged boundaryMap[procMeshI].setSize(interfaces.size(), -1); boundaryFaceMap[procMeshI].setSize(interfaces.size()); diff --git a/src/OpenFOAM/meshes/pointMesh/pointMeshMapper/pointMapper.H b/src/OpenFOAM/meshes/pointMesh/pointMeshMapper/pointMapper.H index dab748488..d1f92b26c 100644 --- a/src/OpenFOAM/meshes/pointMesh/pointMeshMapper/pointMapper.H +++ b/src/OpenFOAM/meshes/pointMesh/pointMeshMapper/pointMapper.H @@ -135,7 +135,7 @@ public: //- Return interpolated addressing virtual const labelListList& addressing() const; - //- Return interpolaion weights + //- Return interpolation weights virtual const scalarListList& weights() const; //- Are there any inserted points diff --git a/src/OpenFOAM/meshes/pointMesh/pointMeshMapper/pointPatchMapper.H b/src/OpenFOAM/meshes/pointMesh/pointMeshMapper/pointPatchMapper.H index 614410633..20c2810ef 100644 --- a/src/OpenFOAM/meshes/pointMesh/pointMeshMapper/pointPatchMapper.H +++ b/src/OpenFOAM/meshes/pointMesh/pointMeshMapper/pointPatchMapper.H @@ -143,7 +143,7 @@ public: //- Return interpolated addressing virtual const labelListList& addressing() const; - //- Return interpolaion weights + //- Return interpolation weights virtual const scalarListList& weights() const; diff --git a/src/OpenFOAM/meshes/polyMesh/mapPolyMesh/cellMapper/cellMapper.H b/src/OpenFOAM/meshes/polyMesh/mapPolyMesh/cellMapper/cellMapper.H index a69ee300c..843b1f9cd 100644 --- a/src/OpenFOAM/meshes/polyMesh/mapPolyMesh/cellMapper/cellMapper.H +++ b/src/OpenFOAM/meshes/polyMesh/mapPolyMesh/cellMapper/cellMapper.H @@ -134,7 +134,7 @@ public: //- Return interpolated addressing virtual const labelListList& addressing() const; - //- Return interpolaion weights + //- Return interpolation weights virtual const scalarListList& weights() const; //- Are there any inserted cells diff --git a/src/OpenFOAM/meshes/polyMesh/mapPolyMesh/faceMapper/faceMapper.H b/src/OpenFOAM/meshes/polyMesh/mapPolyMesh/faceMapper/faceMapper.H index 59aeed574..40aece058 100644 --- a/src/OpenFOAM/meshes/polyMesh/mapPolyMesh/faceMapper/faceMapper.H +++ b/src/OpenFOAM/meshes/polyMesh/mapPolyMesh/faceMapper/faceMapper.H @@ -138,7 +138,7 @@ public: //- Return interpolated addressing virtual const labelListList& addressing() const; - //- Return interpolaion weights + //- Return interpolation weights virtual const scalarListList& weights() const; //- Return flux flip map diff --git a/src/OpenFOAM/primitives/Tensor/tensor/tensor.C b/src/OpenFOAM/primitives/Tensor/tensor/tensor.C index 86e00b4cf..7c78df230 100644 --- a/src/OpenFOAM/primitives/Tensor/tensor/tensor.C +++ b/src/OpenFOAM/primitives/Tensor/tensor/tensor.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -148,7 +148,7 @@ Foam::vector Foam::eigenVector scalar sd0, sd1, sd2; scalar magSd0, magSd1, magSd2; - // Sub-determinants for a unique eivenvalue + // Sub-determinants for a unique eigenvalue sd0 = A.yy()A.zz() - A.yz()A.zy(); sd1 = A.zz()A.xx() - A.zx()A.xz(); sd2 = A.xx()A.yy() - A.xy()A.yx(); diff --git a/src/OpenFOAM/primitives/strings/lists/stringListOps.H b/src/OpenFOAM/primitives/strings/lists/stringListOps.H index 4acc3ffb2..f8f0cfbb5 100644 --- a/src/OpenFOAM/primitives/strings/lists/stringListOps.H +++ b/src/OpenFOAM/primitives/strings/lists/stringListOps.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -21,7 +21,7 @@ License You should have received a copy of the GNU General Public License along with OpenFOAM. If not, see <http://www.gnu.org/licenses/>. -InNamspace +InNamespace Foam Description diff --git a/src/Pstream/mpi/allReduce.H b/src/Pstream/mpi/allReduce.H index 2760416e9..b7d09f005 100644 --- a/src/Pstream/mpi/allReduce.H +++ b/src/Pstream/mpi/allReduce.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2012-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2012-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -21,7 +21,7 @@ License You should have received a copy of the GNU General Public License along with OpenFOAM. If not, see <http://www.gnu.org/licenses/>. -InNamspace +InNamespace Foam Description diff --git a/src/TurbulenceModels/compressible/turbulentFluidThermoModels/derivedFvPatchFields/externalCoupledTemperatureMixed/externalCoupledTemperatureMixedFvPatchScalarField.H b/src/TurbulenceModels/compressible/turbulentFluidThermoModels/derivedFvPatchFields/externalCoupledTemperatureMixed/externalCoupledTemperatureMixedFvPatchScalarField.H index fd5a42228..a55b24b72 100644 --- a/src/TurbulenceModels/compressible/turbulentFluidThermoModels/derivedFvPatchFields/externalCoupledTemperatureMixed/externalCoupledTemperatureMixedFvPatchScalarField.H +++ b/src/TurbulenceModels/compressible/turbulentFluidThermoModels/derivedFvPatchFields/externalCoupledTemperatureMixed/externalCoupledTemperatureMixedFvPatchScalarField.H @@ -38,7 +38,7 @@ Description <magSfN> <valueN> <qDotN> <htcN> \endverbatim - and received as the constituent pieces of the `mixed' condition, i.e. + and received as the constitutent pieces of the `mixed' condition, i.e. \verbatim # Patch: <patch name> diff --git a/src/TurbulenceModels/compressible/turbulentFluidThermoModels/derivedFvPatchFields/wallFunctions/alphatWallFunctions/alphatWallFunction/alphatWallFunctionFvPatchScalarField.H b/src/TurbulenceModels/compressible/turbulentFluidThermoModels/derivedFvPatchFields/wallFunctions/alphatWallFunctions/alphatWallFunction/alphatWallFunctionFvPatchScalarField.H index 80068b86e..9d8a73541 100644 --- a/src/TurbulenceModels/compressible/turbulentFluidThermoModels/derivedFvPatchFields/wallFunctions/alphatWallFunctions/alphatWallFunction/alphatWallFunctionFvPatchScalarField.H +++ b/src/TurbulenceModels/compressible/turbulentFluidThermoModels/derivedFvPatchFields/wallFunctions/alphatWallFunctions/alphatWallFunction/alphatWallFunctionFvPatchScalarField.H @@ -38,8 +38,8 @@ Description where \vartable - \alpha_t\| turblence thermal diffusivity - \mu_t \| turblence viscosity + \alpha_t\| turbulence thermal diffusivity + \mu_t \| turbulence viscosity Pr_t \| turblent Prandtl number \endvartable diff --git a/src/TurbulenceModels/turbulenceModels/derivedFvPatchFields/wallFunctions/epsilonWallFunctions/epsilonWallFunction/epsilonWallFunctionFvPatchScalarField.H b/src/TurbulenceModels/turbulenceModels/derivedFvPatchFields/wallFunctions/epsilonWallFunctions/epsilonWallFunction/epsilonWallFunctionFvPatchScalarField.H index f4bf3afc2..8ee7c0bba 100644 --- a/src/TurbulenceModels/turbulenceModels/derivedFvPatchFields/wallFunctions/epsilonWallFunctions/epsilonWallFunction/epsilonWallFunctionFvPatchScalarField.H +++ b/src/TurbulenceModels/turbulenceModels/derivedFvPatchFields/wallFunctions/epsilonWallFunctions/epsilonWallFunction/epsilonWallFunctionFvPatchScalarField.H @@ -35,8 +35,8 @@ Description where \vartable - epsilon \| turblence dissipation field - G \| turblence generation field + epsilon \| turbulence dissipation field + G \| turbulence generation field \endvartable The model switches between laminar and turbulent functions based on the diff --git a/src/combustionModels/FSD/FSD.H b/src/combustionModels/FSD/FSD.H index 8f5c111f0..37754a5de 100644 --- a/src/combustionModels/FSD/FSD.H +++ b/src/combustionModels/FSD/FSD.H @@ -38,7 +38,7 @@ Description pc is considered from the IFC solution. omegaFuelBar is calculated solving a relaxation equation which tends to omegaEq. This omegaEq is obtained from the flamelet solution for - different strain rates and fit using a expential distribution. + different strain rates and fit using a exponential distribution. The spacial distribution of the consumption speed (omega) is obtained also from a strained flamelet solution and it is assumed to have a gaussian @@ -93,7 +93,7 @@ class FSD //- Fuel mass concentration on the fuel stream dimensionedScalar YFuelFuelStream_; - //- Oxygen mass concentration on the oxydizer stream + //- Oxygen mass concentration on the oxidizer stream dimensionedScalar YO2OxiStream_; //- Similarity constant for the sub-grid ft fluctuations diff --git a/src/conversion/meshReader/starcd/STARCDMeshReader.C b/src/conversion/meshReader/starcd/STARCDMeshReader.C index 520bd6f9a..567f2eb76 100644 --- a/src/conversion/meshReader/starcd/STARCDMeshReader.C +++ b/src/conversion/meshReader/starcd/STARCDMeshReader.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -624,7 +624,7 @@ Body: where boundaryType is truncated to 4 characters from one of the following: INLET -PRESSSURE +PRESSURE OUTLET BAFFLE etc, diff --git a/src/dynamicMesh/boundaryMesh/boundaryMesh.C b/src/dynamicMesh/boundaryMesh/boundaryMesh.C index 9287d0208..4b7b2d7ea 100644 --- a/src/dynamicMesh/boundaryMesh/boundaryMesh.C +++ b/src/dynamicMesh/boundaryMesh/boundaryMesh.C @@ -848,7 +848,7 @@ void Foam::boundaryMesh::writeTriSurface(const fileName& fName) const // Get index in this (boundaryMesh) of face nearest to each boundary face in // pMesh. -// Origininally all triangles/faces of boundaryMesh would be bunged into +// Originally all triangles/faces of boundaryMesh would be bunged into // one big octree. Problem was that faces on top of each other, differing // only in sign of normal, could not be found separately. It would always // find only one. We could detect that it was probably finding the wrong one diff --git a/src/dynamicMesh/meshCut/meshModifiers/multiDirRefinement/multiDirRefinement.C b/src/dynamicMesh/meshCut/meshModifiers/multiDirRefinement/multiDirRefinement.C index b0d888efb..8574ca1e4 100644 --- a/src/dynamicMesh/meshCut/meshModifiers/multiDirRefinement/multiDirRefinement.C +++ b/src/dynamicMesh/meshCut/meshModifiers/multiDirRefinement/multiDirRefinement.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -520,7 +520,7 @@ Foam::multiDirRefinement::multiDirRefinement } -// Construct from directionary and directions to refine. +// Construct from dictionary and directions to refine. Foam::multiDirRefinement::multiDirRefinement ( polyMesh& mesh, diff --git a/src/dynamicMesh/motionSolvers/displacement/layeredSolver/displacementLayeredMotionMotionSolver.C b/src/dynamicMesh/motionSolvers/displacement/layeredSolver/displacementLayeredMotionMotionSolver.C index a991717c0..cd7b19271 100644 --- a/src/dynamicMesh/motionSolvers/displacement/layeredSolver/displacementLayeredMotionMotionSolver.C +++ b/src/dynamicMesh/motionSolvers/displacement/layeredSolver/displacementLayeredMotionMotionSolver.C @@ -255,7 +255,7 @@ Foam::displacementLayeredMotionMotionSolver::faceZoneEvaluate } else if (type == "uniformFollow") { - // Reads name of name of patch. Then get average point dislacement on + // Reads name of name of patch. Then get average point displacement on // patch. That becomes the value of fld. const word patchName(dict.lookup("patch")); label patchID = mesh().boundaryMesh().findPatchID(patchName); diff --git a/src/dynamicMesh/motionSolvers/displacement/solidBody/solidBodyMotionFunctions/rotatingMotion/rotatingMotion.H b/src/dynamicMesh/motionSolvers/displacement/solidBody/solidBodyMotionFunctions/rotatingMotion/rotatingMotion.H index 36520b9f3..91d29dc82 100644 --- a/src/dynamicMesh/motionSolvers/displacement/solidBody/solidBodyMotionFunctions/rotatingMotion/rotatingMotion.H +++ b/src/dynamicMesh/motionSolvers/displacement/solidBody/solidBodyMotionFunctions/rotatingMotion/rotatingMotion.H @@ -67,7 +67,7 @@ class rotatingMotion //- Axis vector const vector axis_; - //- Angular velocty (rad/sec) + //- Angular velocity (rad/sec) autoPtr<Function1<scalar>> omega_; diff --git a/src/dynamicMesh/polyTopoChange/polyTopoChange/addObject/polyAddFace.H b/src/dynamicMesh/polyTopoChange/polyTopoChange/addObject/polyAddFace.H index f3e388900..33f3e307b 100644 --- a/src/dynamicMesh/polyTopoChange/polyTopoChange/addObject/polyAddFace.H +++ b/src/dynamicMesh/polyTopoChange/polyTopoChange/addObject/polyAddFace.H @@ -247,7 +247,7 @@ public: return owner_; } - //- Return neighour cell + //- Return neighbour cell label neighbour() const { return neighbour_; diff --git a/src/dynamicMesh/polyTopoChange/polyTopoChange/duplicatePoints.C b/src/dynamicMesh/polyTopoChange/polyTopoChange/duplicatePoints.C index 55648ab69..f04999e40 100644 --- a/src/dynamicMesh/polyTopoChange/polyTopoChange/duplicatePoints.C +++ b/src/dynamicMesh/polyTopoChange/polyTopoChange/duplicatePoints.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -104,7 +104,7 @@ void Foam::duplicatePoints::setRefinement - // Modfify faces according to face region + // Modify faces according to face region // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ face newFace; diff --git a/src/dynamicMesh/polyTopoChange/polyTopoChange/tetDecomposer.C b/src/dynamicMesh/polyTopoChange/polyTopoChange/tetDecomposer.C index 7ae9d0846..1cd0b69a7 100644 --- a/src/dynamicMesh/polyTopoChange/polyTopoChange/tetDecomposer.C +++ b/src/dynamicMesh/polyTopoChange/polyTopoChange/tetDecomposer.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2012-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2012-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -449,7 +449,7 @@ void Foam::tetDecomposer::setRefinement label nextFp = f.fcIndex(fp); - // Triangle triI consisiting of f[fp0], f[fp], f[nextFp] + // Triangle triI consisting of f[fp0], f[fp], f[nextFp] // 1. Front triangle (decomposition of face itself) diff --git a/src/dynamicMesh/slidingInterface/coupleSlidingInterface.C b/src/dynamicMesh/slidingInterface/coupleSlidingInterface.C index 314d9124b..a7c9f760c 100644 --- a/src/dynamicMesh/slidingInterface/coupleSlidingInterface.C +++ b/src/dynamicMesh/slidingInterface/coupleSlidingInterface.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -384,7 +384,7 @@ void Foam::slidingInterface::coupleInterface(polyTopoChange& ref) const // cutPointEdgePairMap // Note. "Processing slave edges" code is repeated twice in the - // sliding intergace coupling in order to allow the point + // sliding interface coupling in order to allow the point // projection to be done separately from the actual cutting. // Please change consistently with slidingInterfaceProjectPoints.C // diff --git a/src/dynamicMesh/slidingInterface/slidingInterfaceProjectPoints.C b/src/dynamicMesh/slidingInterface/slidingInterfaceProjectPoints.C index 15386794d..5bd3da35f 100644 --- a/src/dynamicMesh/slidingInterface/slidingInterfaceProjectPoints.C +++ b/src/dynamicMesh/slidingInterface/slidingInterfaceProjectPoints.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -729,7 +729,7 @@ bool Foam::slidingInterface::projectPoints() const scalarField masterPointEdgeDist(masterLocalPoints.size(), great); // Note. "Processing slave edges" code is repeated twice in the - // sliding intergace coupling in order to allow the point + // sliding interface coupling in order to allow the point // projection to be done separately from the actual cutting. // Please change consistently with coupleSlidingInterface.C // diff --git a/src/finiteVolume/cfdTools/general/MRF/MRFZone.H b/src/finiteVolume/cfdTools/general/MRF/MRFZone.H index edb8b54d2..51aa743e4 100644 --- a/src/finiteVolume/cfdTools/general/MRF/MRFZone.H +++ b/src/finiteVolume/cfdTools/general/MRF/MRFZone.H @@ -104,7 +104,7 @@ class MRFZone //- Axis vector vector axis_; - //- Angular velocty (rad/sec) + //- Angular velocity (rad/sec) autoPtr<Function1<scalar>> omega_; diff --git a/src/finiteVolume/cfdTools/general/SRF/SRFModel/SRFModel/SRFModel.H b/src/finiteVolume/cfdTools/general/SRF/SRFModel/SRFModel/SRFModel.H index 278a1b161..8c6f78bae 100644 --- a/src/finiteVolume/cfdTools/general/SRF/SRFModel/SRFModel/SRFModel.H +++ b/src/finiteVolume/cfdTools/general/SRF/SRFModel/SRFModel/SRFModel.H @@ -81,7 +81,7 @@ protected: //- Axis of rotation, a direction vector which passes through the origin vector axis_; - //- SRF model coeficients dictionary + //- SRF model coefficients dictionary dictionary SRFModelCoeffs_; //- Angular velocity of the frame (rad/s) diff --git a/src/finiteVolume/cfdTools/general/findRefCell/findRefCell.C b/src/finiteVolume/cfdTools/general/findRefCell/findRefCell.C index f2246afaa..fae9bc2f0 100644 --- a/src/finiteVolume/cfdTools/general/findRefCell/findRefCell.C +++ b/src/finiteVolume/cfdTools/general/findRefCell/findRefCell.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -76,7 +76,7 @@ bool Foam::setRefCell label sumHasRef = returnReduce<label>(hasRef, sumOp<label>()); // If reference cell no found use octree search - // with cell tet-decompositoin + // with cell tet-decomposition if (sumHasRef != 1) { refCelli = field.mesh().findCell(refPointi); diff --git a/src/finiteVolume/cfdTools/general/solutionControl/convergenceControl/convergenceControl/convergenceControl.H b/src/finiteVolume/cfdTools/general/solutionControl/convergenceControl/convergenceControl/convergenceControl.H index 9aecebac1..6e4e38941 100644 --- a/src/finiteVolume/cfdTools/general/solutionControl/convergenceControl/convergenceControl/convergenceControl.H +++ b/src/finiteVolume/cfdTools/general/solutionControl/convergenceControl/convergenceControl/convergenceControl.H @@ -153,10 +153,10 @@ public: //- Return true if all convergence checks are satisfied virtual bool criteriaSatisfied() const = 0; - //- Flag to indicate whether convergance has been reached + //- Flag to indicate whether convergence has been reached bool converged(); - //- End the run if convergance has been reached + //- End the run if convergence has been reached bool endIfConverged(Time& time); diff --git a/src/finiteVolume/cfdTools/general/solutionControl/pimpleControl/pimpleNoLoopControl/pimpleNoLoopControl.H b/src/finiteVolume/cfdTools/general/solutionControl/pimpleControl/pimpleNoLoopControl/pimpleNoLoopControl.H index 380e93a64..f0d3bbe1b 100644 --- a/src/finiteVolume/cfdTools/general/solutionControl/pimpleControl/pimpleNoLoopControl/pimpleNoLoopControl.H +++ b/src/finiteVolume/cfdTools/general/solutionControl/pimpleControl/pimpleNoLoopControl/pimpleNoLoopControl.H @@ -72,8 +72,8 @@ protected: // than PISO mode bool simpleRho_; - //- Flag to control whether turblence is solved just on the final pimple - // iteration, or on every pimple iteration + //- Flag to control whether turbulence is solved just on the final + // pimple iteration, or on every pimple iteration bool turbOnFinalIterOnly_; diff --git a/src/finiteVolume/fields/fvPatchFields/basic/calculated/calculatedFvPatchField.H b/src/finiteVolume/fields/fvPatchFields/basic/calculated/calculatedFvPatchField.H index 14784df5d..57aabb48e 100644 --- a/src/finiteVolume/fields/fvPatchFields/basic/calculated/calculatedFvPatchField.H +++ b/src/finiteVolume/fields/fvPatchFields/basic/calculated/calculatedFvPatchField.H @@ -25,7 +25,7 @@ Class Foam::calculatedFvPatchField Description - This boundary condition is not designed to be evaluated; it is assmued + This boundary condition is not designed to be evaluated; it is assumed that the value is assigned via field assignment, and not via a call to e.g. \c updateCoeffs or \c evaluate. diff --git a/src/finiteVolume/fields/fvPatchFields/constraint/cyclicAMI/cyclicAMIFvPatchField.H b/src/finiteVolume/fields/fvPatchFields/constraint/cyclicAMI/cyclicAMIFvPatchField.H index 8cb89bb00..382373abf 100644 --- a/src/finiteVolume/fields/fvPatchFields/constraint/cyclicAMI/cyclicAMIFvPatchField.H +++ b/src/finiteVolume/fields/fvPatchFields/constraint/cyclicAMI/cyclicAMIFvPatchField.H @@ -40,7 +40,7 @@ Usage Note The outer boundary of the patch pairs must be similar, i.e. if the owner - patch is transformed to the neighbour patch, the outer perimiter of each + patch is transformed to the neighbour patch, the outer perimeter of each patch should be identical (or very similar). See also diff --git a/src/finiteVolume/fields/fvPatchFields/constraint/cyclicRepeatAMI/cyclicRepeatAMIFvPatchField.H b/src/finiteVolume/fields/fvPatchFields/constraint/cyclicRepeatAMI/cyclicRepeatAMIFvPatchField.H index feb3b3c3a..99f8b5028 100644 --- a/src/finiteVolume/fields/fvPatchFields/constraint/cyclicRepeatAMI/cyclicRepeatAMIFvPatchField.H +++ b/src/finiteVolume/fields/fvPatchFields/constraint/cyclicRepeatAMI/cyclicRepeatAMIFvPatchField.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2018-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -40,7 +40,7 @@ Usage Note The outer boundary of the patch pairs must be similar, i.e. if the owner - patch is transformed to the neighbour patch, the outer perimiter of each + patch is transformed to the neighbour patch, the outer perimeter of each patch should be identical (or very similar). See also diff --git a/src/finiteVolume/fields/fvPatchFields/derived/rotatingPressureInletOutletVelocity/rotatingPressureInletOutletVelocityFvPatchVectorField.H b/src/finiteVolume/fields/fvPatchFields/derived/rotatingPressureInletOutletVelocity/rotatingPressureInletOutletVelocityFvPatchVectorField.H index a384f97da..a0cfdec13 100644 --- a/src/finiteVolume/fields/fvPatchFields/derived/rotatingPressureInletOutletVelocity/rotatingPressureInletOutletVelocityFvPatchVectorField.H +++ b/src/finiteVolume/fields/fvPatchFields/derived/rotatingPressureInletOutletVelocity/rotatingPressureInletOutletVelocityFvPatchVectorField.H @@ -35,7 +35,7 @@ Usage Property \| Description \| Required \| Default value phi \| flux field name \| no \| phi tangentialVelocity \| tangential velocity field \| no \| - omega \| angular velocty of the frame [rad/s] \| yes \| + omega \| angular velocity of the frame [rad/s] \| yes \| \endtable Example of the boundary condition specification: diff --git a/src/finiteVolume/fields/fvPatchFields/derived/rotatingTotalPressure/rotatingTotalPressureFvPatchScalarField.H b/src/finiteVolume/fields/fvPatchFields/derived/rotatingTotalPressure/rotatingTotalPressureFvPatchScalarField.H index 2065aec70..a9c2f8b20 100644 --- a/src/finiteVolume/fields/fvPatchFields/derived/rotatingTotalPressure/rotatingTotalPressureFvPatchScalarField.H +++ b/src/finiteVolume/fields/fvPatchFields/derived/rotatingTotalPressure/rotatingTotalPressureFvPatchScalarField.H @@ -37,7 +37,7 @@ Usage psi \| compressibility field name \| no \| none gamma \| ratio of specific heats (Cp/Cv) \| yes \| p0 \| static pressure reference \| yes \| - omega \| angular velocty of the frame [rad/s] \| yes \| + omega \| angular velocity of the frame [rad/s] \| yes \| \endtable Example of the boundary condition specification: diff --git a/src/finiteVolume/fields/fvPatchFields/derived/rotatingWallVelocity/rotatingWallVelocityFvPatchVectorField.H b/src/finiteVolume/fields/fvPatchFields/derived/rotatingWallVelocity/rotatingWallVelocityFvPatchVectorField.H index d4890d905..f36fbcf7f 100644 --- a/src/finiteVolume/fields/fvPatchFields/derived/rotatingWallVelocity/rotatingWallVelocityFvPatchVectorField.H +++ b/src/finiteVolume/fields/fvPatchFields/derived/rotatingWallVelocity/rotatingWallVelocityFvPatchVectorField.H @@ -32,7 +32,7 @@ Usage Property \| Description \| Required \| Default value origin \| origin of rotation in Cartesian co-ordinates \| yes\| axis \| axis of rotation \| yes \| - omega \| angular velocty of the frame [rad/s] \| yes \| + omega \| angular velocity of the frame [rad/s] \| yes \| \endtable Example of the boundary condition specification: diff --git a/src/finiteVolume/fields/fvPatchFields/derived/variableHeightFlowRateInletVelocity/variableHeightFlowRateInletVelocityFvPatchVectorField.H b/src/finiteVolume/fields/fvPatchFields/derived/variableHeightFlowRateInletVelocity/variableHeightFlowRateInletVelocityFvPatchVectorField.H index d4a4d7aaa..15c07615d 100644 --- a/src/finiteVolume/fields/fvPatchFields/derived/variableHeightFlowRateInletVelocity/variableHeightFlowRateInletVelocityFvPatchVectorField.H +++ b/src/finiteVolume/fields/fvPatchFields/derived/variableHeightFlowRateInletVelocity/variableHeightFlowRateInletVelocityFvPatchVectorField.H @@ -26,7 +26,7 @@ Class Description This boundary condition provides a velocity boundary condition for - multphase flow based on a user-specified volumetric flow rate. + multiphase flow based on a user-specified volumetric flow rate. The flow rate is made proportional to the phase fraction alpha at each face of the patch and alpha is ensured to be bound between 0 and 1. diff --git a/src/finiteVolume/finiteVolume/fvSchemes/fvSchemes.H b/src/finiteVolume/finiteVolume/fvSchemes/fvSchemes.H index 2adf8116b..e25b6faa8 100644 --- a/src/finiteVolume/finiteVolume/fvSchemes/fvSchemes.H +++ b/src/finiteVolume/finiteVolume/fvSchemes/fvSchemes.H @@ -26,7 +26,7 @@ Class Description Selector class for finite volume differencing schemes. - fvMesh is derived from fvShemes so that all fields have access to the + fvMesh is derived from fvSchemes so that all fields have access to the fvSchemes from the mesh reference they hold. SourceFiles diff --git a/src/finiteVolume/fvMesh/fvMeshMapper/fvPatchMapper.H b/src/finiteVolume/fvMesh/fvMeshMapper/fvPatchMapper.H index 50920a25b..6f6828190 100644 --- a/src/finiteVolume/fvMesh/fvMeshMapper/fvPatchMapper.H +++ b/src/finiteVolume/fvMesh/fvMeshMapper/fvPatchMapper.H @@ -141,7 +141,7 @@ public: //- Return interpolated addressing virtual const labelListList& addressing() const; - //- Return interpolaion weights + //- Return interpolation weights virtual const scalarListList& weights() const; diff --git a/src/finiteVolume/fvMesh/fvMeshMapper/fvSurfaceMapper.H b/src/finiteVolume/fvMesh/fvMeshMapper/fvSurfaceMapper.H index 127b87bbb..85d9c30fb 100644 --- a/src/finiteVolume/fvMesh/fvMeshMapper/fvSurfaceMapper.H +++ b/src/finiteVolume/fvMesh/fvMeshMapper/fvSurfaceMapper.H @@ -135,7 +135,7 @@ public: //- Return interpolated addressing virtual const labelListList& addressing() const; - //- Return interpolaion weights + //- Return interpolation weights virtual const scalarListList& weights() const; //- Are there any inserted faces diff --git a/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear2/filteredLinear2.H b/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear2/filteredLinear2.H index d575a5b30..e088774ff 100644 --- a/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear2/filteredLinear2.H +++ b/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear2/filteredLinear2.H @@ -61,7 +61,7 @@ class filteredLinear2Limiter { // Private Data - // Scaling corefficient for the gradient ratio, + // Scaling coefficient for the gradient ratio, // 0 = linear // 1 = fully limited scalar k_; diff --git a/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear2/filteredLinear2V.H b/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear2/filteredLinear2V.H index ac43a9efd..effa3ad6a 100644 --- a/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear2/filteredLinear2V.H +++ b/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear2/filteredLinear2V.H @@ -61,7 +61,7 @@ class filteredLinear2VLimiter { // Private Data - // Scaling corefficient for the gradient ratio, + // Scaling coefficient for the gradient ratio, // 0 = linear // 1 = fully limited scalar k_; diff --git a/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear3/filteredLinear3.H b/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear3/filteredLinear3.H index 0e76718b8..07ae699e1 100644 --- a/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear3/filteredLinear3.H +++ b/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear3/filteredLinear3.H @@ -61,7 +61,7 @@ class filteredLinear3Limiter { // Private Data - // Scaling corefficient for the gradient ratio, + // Scaling coefficient for the gradient ratio, // 0 = linear // 1 = fully limited scalar k_; diff --git a/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear3/filteredLinear3V.H b/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear3/filteredLinear3V.H index 942576f01..23924891f 100644 --- a/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear3/filteredLinear3V.H +++ b/src/finiteVolume/interpolation/surfaceInterpolation/limitedSchemes/filteredLinear3/filteredLinear3V.H @@ -61,7 +61,7 @@ class filteredLinear3VLimiter { // Private Data - // Scaling corefficient for the gradient ratio, + // Scaling coefficient for the gradient ratio, // 0 = linear // 1 = fully limited scalar k_; diff --git a/src/functionObjects/field/randomise/randomise.H b/src/functionObjects/field/randomise/randomise.H index ac248e3bb..e24d8e294 100644 --- a/src/functionObjects/field/randomise/randomise.H +++ b/src/functionObjects/field/randomise/randomise.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2016-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2016-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -59,13 +59,13 @@ class randomise { // Private member data - //- The magnitude of the purturbation + //- The magnitude of the perturbation scalar magPerturbation_; // Private Member Functions - //- Calculate the randomisenitude of the field and register the result + //- Add random component to the field and register the result template<class Type> bool calcRandomised(); diff --git a/src/fvAgglomerationMethods/MGridGenGamgAgglomeration/MGridGenGAMGAgglomeration.C b/src/fvAgglomerationMethods/MGridGenGamgAgglomeration/MGridGenGAMGAgglomeration.C index d24c9346a..8865bf70f 100644 --- a/src/fvAgglomerationMethods/MGridGenGamgAgglomeration/MGridGenGAMGAgglomeration.C +++ b/src/fvAgglomerationMethods/MGridGenGamgAgglomeration/MGridGenGAMGAgglomeration.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -238,7 +238,7 @@ Foam::MGridGenGAMGAgglomeration::MGridGenGAMGAgglomeration const labelField& agglom = finalAgglomPtr(); - // Global nubmering + // Global numbering const globalIndex globalNumbering(nCoarseCells); labelField globalAgglom(addr.size()); diff --git a/src/fvOptions/sources/derived/rotorDiskSource/rotorDiskSource.H b/src/fvOptions/sources/derived/rotorDiskSource/rotorDiskSource.H index 495205b85..32e4043a8 100644 --- a/src/fvOptions/sources/derived/rotorDiskSource/rotorDiskSource.H +++ b/src/fvOptions/sources/derived/rotorDiskSource/rotorDiskSource.H @@ -75,7 +75,7 @@ Usage Where: Valid options for the \c geometryMode entry include: - - auto : determine rototor co-ord system from cells + - auto : determine rotor co-ord system from cells - specified : specified co-ord system Valid options for the \c inletFlowType entry include: @@ -170,7 +170,7 @@ protected: //- Inlet flow type inletFlowType inletFlow_; - //- Inlet velocity for specified iinflow + //- Inlet velocity for specified inflow vector inletVelocity_; //- Tip effect [0-1] diff --git a/src/fvOptions/sources/interRegion/interRegionHeatTransfer/interRegionHeatTransferModel/interRegionHeatTransferModel.H b/src/fvOptions/sources/interRegion/interRegionHeatTransfer/interRegionHeatTransferModel/interRegionHeatTransferModel.H index 067bd296c..2d8e31af0 100644 --- a/src/fvOptions/sources/interRegion/interRegionHeatTransfer/interRegionHeatTransferModel/interRegionHeatTransferModel.H +++ b/src/fvOptions/sources/interRegion/interRegionHeatTransfer/interRegionHeatTransferModel/interRegionHeatTransferModel.H @@ -26,7 +26,7 @@ Class Description Base class for inter region heat exchange. The derived classes must - provide the heat transfer coeffisine (htc) which is used as follows + provide the heat transfer coefficient (htc) which is used as follows in the energy equation. \f[ diff --git a/src/lagrangian/DSMC/submodels/BinaryCollisionModel/NoBinaryCollision/NoBinaryCollision.H b/src/lagrangian/DSMC/submodels/BinaryCollisionModel/NoBinaryCollision/NoBinaryCollision.H index bc314588a..98c0fd60c 100644 --- a/src/lagrangian/DSMC/submodels/BinaryCollisionModel/NoBinaryCollision/NoBinaryCollision.H +++ b/src/lagrangian/DSMC/submodels/BinaryCollisionModel/NoBinaryCollision/NoBinaryCollision.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -25,7 +25,7 @@ Class Foam::NoBinaryCollision Description - No collison BinaryCollision Model + No collision BinaryCollision Model \---------------------------------------------------------------------------/ diff --git a/src/lagrangian/distributionModels/massRosinRammler/massRosinRammler.H b/src/lagrangian/distributionModels/massRosinRammler/massRosinRammler.H index f215e2a89..b12cf79cd 100644 --- a/src/lagrangian/distributionModels/massRosinRammler/massRosinRammler.H +++ b/src/lagrangian/distributionModels/massRosinRammler/massRosinRammler.H @@ -28,7 +28,7 @@ Description Mass-based Rosin-Rammler distributionModel. Corrected form of the Rosin-Rammler distribution taking into account the - varying number of particels per parces for for fixed-mass parcels. This + varying number of particles per parcel for for fixed-mass parcels. This distribution should be used when \verbatim parcelBasisType mass; diff --git a/src/lagrangian/intermediate/clouds/Templates/CollidingCloud/CollidingCloud.H b/src/lagrangian/intermediate/clouds/Templates/CollidingCloud/CollidingCloud.H index 1d85f2eac..493fc92fb 100644 --- a/src/lagrangian/intermediate/clouds/Templates/CollidingCloud/CollidingCloud.H +++ b/src/lagrangian/intermediate/clouds/Templates/CollidingCloud/CollidingCloud.H @@ -25,7 +25,7 @@ Class Foam::CollidingCloud Description - Adds coolisions to kinematic clouds + Adds collisions to kinematic clouds SourceFiles CollidingCloudI.H diff --git a/src/lagrangian/intermediate/clouds/Templates/ReactingMultiphaseCloud/ReactingMultiphaseCloud.H b/src/lagrangian/intermediate/clouds/Templates/ReactingMultiphaseCloud/ReactingMultiphaseCloud.H index d6a265bff..5d63c36a2 100644 --- a/src/lagrangian/intermediate/clouds/Templates/ReactingMultiphaseCloud/ReactingMultiphaseCloud.H +++ b/src/lagrangian/intermediate/clouds/Templates/ReactingMultiphaseCloud/ReactingMultiphaseCloud.H @@ -29,7 +29,7 @@ Description - Adds to reacting cloud - multiphase composition - - devolatilisatsion + - devolatilisation - surface reactions SourceFiles diff --git a/src/lagrangian/intermediate/clouds/Templates/ThermoCloud/ThermoCloud.H b/src/lagrangian/intermediate/clouds/Templates/ThermoCloud/ThermoCloud.H index f36264c43..538ae5fca 100644 --- a/src/lagrangian/intermediate/clouds/Templates/ThermoCloud/ThermoCloud.H +++ b/src/lagrangian/intermediate/clouds/Templates/ThermoCloud/ThermoCloud.H @@ -228,7 +228,7 @@ public: //- Return const access to the carrier temperature field inline const volScalarField& T() const; - //- Return const access to the carrier prressure field + //- Return const access to the carrier pressure field inline const volScalarField& p() const; diff --git a/src/lagrangian/intermediate/parcels/Templates/MPPICParcel/MPPICParcel.H b/src/lagrangian/intermediate/parcels/Templates/MPPICParcel/MPPICParcel.H index 804a17133..2c4b74888 100644 --- a/src/lagrangian/intermediate/parcels/Templates/MPPICParcel/MPPICParcel.H +++ b/src/lagrangian/intermediate/parcels/Templates/MPPICParcel/MPPICParcel.H @@ -47,7 +47,7 @@ SourceFiles namespace Foam { -// Forward declaration of clases +// Forward declaration of classes template<class ParcelType> class MPPICParcel; diff --git a/src/lagrangian/intermediate/parcels/Templates/ReactingMultiphaseParcel/ReactingMultiphaseParcel.H b/src/lagrangian/intermediate/parcels/Templates/ReactingMultiphaseParcel/ReactingMultiphaseParcel.H index bf3803c59..1e22a151c 100644 --- a/src/lagrangian/intermediate/parcels/Templates/ReactingMultiphaseParcel/ReactingMultiphaseParcel.H +++ b/src/lagrangian/intermediate/parcels/Templates/ReactingMultiphaseParcel/ReactingMultiphaseParcel.H @@ -74,7 +74,7 @@ class ReactingMultiphaseParcel public: - // IDs of phases in ReacingParcel phase list (Y) + // IDs of phases in ReactingParcel phase list (Y) static const label GAS; static const label LIQ; diff --git a/src/lagrangian/intermediate/submodels/CloudFunctionObjects/CloudFunctionObject/CloudFunctionObject.H b/src/lagrangian/intermediate/submodels/CloudFunctionObjects/CloudFunctionObject/CloudFunctionObject.H index 8b2af98d9..2be98c2b4 100644 --- a/src/lagrangian/intermediate/submodels/CloudFunctionObjects/CloudFunctionObject/CloudFunctionObject.H +++ b/src/lagrangian/intermediate/submodels/CloudFunctionObjects/CloudFunctionObject/CloudFunctionObject.H @@ -66,7 +66,7 @@ class CloudFunctionObject // Private Member Functions - //- Inherite write from CloudSubModelBase + //- Inherit write from CloudSubModelBase using CloudSubModelBase<CloudType>::write; //- Write post-processing info diff --git a/src/lagrangian/intermediate/submodels/CloudFunctionObjects/FacePostProcessing/FacePostProcessing.H b/src/lagrangian/intermediate/submodels/CloudFunctionObjects/FacePostProcessing/FacePostProcessing.H index 84b5f37e4..62bbec364 100644 --- a/src/lagrangian/intermediate/submodels/CloudFunctionObjects/FacePostProcessing/FacePostProcessing.H +++ b/src/lagrangian/intermediate/submodels/CloudFunctionObjects/FacePostProcessing/FacePostProcessing.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -28,7 +28,7 @@ Description Records particle face quantities on used-specified face zone Currently supports: - accummulated mass + accumulated mass average mass flux SourceFiles diff --git a/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/PairModel/PairSpringSliderDashpot/PairSpringSliderDashpot.H b/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/PairModel/PairSpringSliderDashpot/PairSpringSliderDashpot.H index 6b0a4dd0d..6a2123224 100644 --- a/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/PairModel/PairSpringSliderDashpot/PairSpringSliderDashpot.H +++ b/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/PairModel/PairSpringSliderDashpot/PairSpringSliderDashpot.H @@ -86,7 +86,7 @@ class PairSpringSliderDashpot // parcelEquivD = cbrt(volumeFactornParticles)p.d() // + When volumeFactor = 1, the particles are compressed // together so that the equivalent volume of the parcel is - // the sum of the constituent particles + // the sum of the constitutent particles // + When volumeFactor = 3sqrt(2)/pi, the particles are // close packed, but uncompressed. // + When volumeFactor > 3sqrt(2)/pi, the particles loosely diff --git a/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/WallModel/WallLocalSpringSliderDashpot/WallLocalSpringSliderDashpot.H b/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/WallModel/WallLocalSpringSliderDashpot/WallLocalSpringSliderDashpot.H index 4160f1efa..c0123ea2f 100644 --- a/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/WallModel/WallLocalSpringSliderDashpot/WallLocalSpringSliderDashpot.H +++ b/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/WallModel/WallLocalSpringSliderDashpot/WallLocalSpringSliderDashpot.H @@ -89,7 +89,7 @@ class WallLocalSpringSliderDashpot // parcelEquivD = cbrt(volumeFactornParticles)p.d() // + When volumeFactor = 1, the particles are compressed // together so that the equivalent volume of the parcel is - // the sum of the constituent particles + // the sum of the constitutent particles // + When volumeFactor = 3sqrt(2)/pi, the particles are // close packed, but uncompressed. // + When volumeFactor > 3sqrt(2)/pi, the particles loosely diff --git a/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/WallModel/WallSpringSliderDashpot/WallSpringSliderDashpot.H b/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/WallModel/WallSpringSliderDashpot/WallSpringSliderDashpot.H index 50180c6e7..f9d7320d4 100644 --- a/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/WallModel/WallSpringSliderDashpot/WallSpringSliderDashpot.H +++ b/src/lagrangian/intermediate/submodels/Kinematic/CollisionModel/PairCollision/WallModel/WallSpringSliderDashpot/WallSpringSliderDashpot.H @@ -83,7 +83,7 @@ class WallSpringSliderDashpot // parcelEquivD = cbrt(volumeFactornParticles)p.d() // + When volumeFactor = 1, the particles are compressed // together so that the equivalent volume of the parcel is - // the sum of the constituent particles + // the sum of the constitutent particles // + When volumeFactor = 3sqrt(2)/pi, the particles are // close packed, but uncompressed. // + When volumeFactor > 3sqrt(2)/pi, the particles loosely diff --git a/src/lagrangian/intermediate/submodels/Kinematic/ParticleForces/Lift/LiftForce/LiftForce.H b/src/lagrangian/intermediate/submodels/Kinematic/ParticleForces/Lift/LiftForce/LiftForce.H index 9910e7092..6714f15ff 100644 --- a/src/lagrangian/intermediate/submodels/Kinematic/ParticleForces/Lift/LiftForce/LiftForce.H +++ b/src/lagrangian/intermediate/submodels/Kinematic/ParticleForces/Lift/LiftForce/LiftForce.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2012-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2012-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -65,7 +65,7 @@ protected: autoPtr<interpolation<vector>> curlUcInterpPtr_; - // Potected Member Functions + // Protected Member Functions //- Calculate the lift coefficient virtual scalar Cl diff --git a/src/lagrangian/intermediate/submodels/MPPIC/AveragingMethods/Dual/Dual.H b/src/lagrangian/intermediate/submodels/MPPIC/AveragingMethods/Dual/Dual.H index 5634fef80..473b0e331 100644 --- a/src/lagrangian/intermediate/submodels/MPPIC/AveragingMethods/Dual/Dual.H +++ b/src/lagrangian/intermediate/submodels/MPPIC/AveragingMethods/Dual/Dual.H @@ -31,12 +31,12 @@ Description computational cells. Summation is done in the cells, and also in the tetrahedrons surrounding each point. The latter forms a type of dual mesh. The interpolation is weighted by proximity to the cell centre or point, as - calculated by the barycentric coordinate within the tethrahedron. + calculated by the barycentric coordinate within the tetrahedron. - Values are interpolated linearly across the tethrahedron. Gradients are + Values are interpolated linearly across the tetrahedron. Gradients are calculated directly from the point values using a first order finite element basis. The computed gradient is assumed constant over the - tethrahedron. + tetrahedron. SourceFiles Dual.C diff --git a/src/lagrangian/intermediate/submodels/MPPIC/PackingModels/Explicit/Explicit.H b/src/lagrangian/intermediate/submodels/MPPIC/PackingModels/Explicit/Explicit.H index 00c040484..051aaabc0 100644 --- a/src/lagrangian/intermediate/submodels/MPPIC/PackingModels/Explicit/Explicit.H +++ b/src/lagrangian/intermediate/submodels/MPPIC/PackingModels/Explicit/Explicit.H @@ -30,7 +30,7 @@ Description The inter-particle stress is calculated using current particle locations. This force is then applied only to the particles that are moving towards regions of close pack. The resulting velocity change is limited using an - abtracted correction velocity limiter. + abstracted correction velocity limiter. Reference: \verbatim diff --git a/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/HarrisCrighton/HarrisCrighton.H b/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/HarrisCrighton/HarrisCrighton.H index bdecb2f38..e3fc2e1f6 100644 --- a/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/HarrisCrighton/HarrisCrighton.H +++ b/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/HarrisCrighton/HarrisCrighton.H @@ -126,7 +126,7 @@ public: const Field<scalar>& uRms ) const; - //- Collision stress derivaive w.r.t. the volume fraction + //- Collision stress derivative w.r.t. the volume fraction tmp<Field<scalar>> dTaudTheta ( const Field<scalar>& alpha, diff --git a/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/Lun/Lun.H b/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/Lun/Lun.H index a11f08367..c3c57f565 100644 --- a/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/Lun/Lun.H +++ b/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/Lun/Lun.H @@ -118,7 +118,7 @@ public: const Field<scalar>& uRms ) const; - //- Collision stress derivaive w.r.t. the volume fraction + //- Collision stress derivative w.r.t. the volume fraction tmp<Field<scalar>> dTaudTheta ( const Field<scalar>& alpha, diff --git a/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/ParticleStressModel/ParticleStressModel.H b/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/ParticleStressModel/ParticleStressModel.H index 041987e34..eb240810f 100644 --- a/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/ParticleStressModel/ParticleStressModel.H +++ b/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/ParticleStressModel/ParticleStressModel.H @@ -117,7 +117,7 @@ public: const Field<scalar>& uRms ) const = 0; - //- Collision stress derivaive w.r.t. the volume fraction + //- Collision stress derivative w.r.t. the volume fraction virtual tmp<Field<scalar>> dTaudTheta ( const Field<scalar>& alpha, diff --git a/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/exponential/exponential.H b/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/exponential/exponential.H index 0200cf487..60b1a23c0 100644 --- a/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/exponential/exponential.H +++ b/src/lagrangian/intermediate/submodels/MPPIC/ParticleStressModels/exponential/exponential.H @@ -103,7 +103,7 @@ public: const Field<scalar>& uRms ) const; - //- Collision stress derivaive w.r.t. the volume fraction + //- Collision stress derivative w.r.t. the volume fraction tmp<Field<scalar>> dTaudTheta ( const Field<scalar>& alpha, diff --git a/src/lagrangian/intermediate/submodels/Reacting/CompositionModel/CompositionModel/CompositionModel.H b/src/lagrangian/intermediate/submodels/Reacting/CompositionModel/CompositionModel/CompositionModel.H index b30326eac..a9a63b5a5 100644 --- a/src/lagrangian/intermediate/submodels/Reacting/CompositionModel/CompositionModel/CompositionModel.H +++ b/src/lagrangian/intermediate/submodels/Reacting/CompositionModel/CompositionModel/CompositionModel.H @@ -239,7 +239,7 @@ public: const scalar T ) const; - //- Return specific heat caoacity for the phase phaseI + //- Return specific heat capacity for the phase phaseI virtual scalar Cp ( const label phaseI, diff --git a/src/lagrangian/intermediate/submodels/Reacting/InjectionModel/ReactingLookupTableInjection/ReactingLookupTableInjection.H b/src/lagrangian/intermediate/submodels/Reacting/InjectionModel/ReactingLookupTableInjection/ReactingLookupTableInjection.H index c873fcf5b..8ca0caa25 100644 --- a/src/lagrangian/intermediate/submodels/Reacting/InjectionModel/ReactingLookupTableInjection/ReactingLookupTableInjection.H +++ b/src/lagrangian/intermediate/submodels/Reacting/InjectionModel/ReactingLookupTableInjection/ReactingLookupTableInjection.H @@ -87,13 +87,13 @@ class ReactingLookupTableInjection //- List of injectors reactingParcelInjectionDataIOList injectors_; - //- List of cell labels corresoponding to injector positions + //- List of cell labels corresponding to injector positions labelList injectorCells_; - //- List of tetFace labels corresoponding to injector positions + //- List of tetFace labels corresponding to injector positions labelList injectorTetFaces_; - //- List of tetPt labels corresoponding to injector positions + //- List of tetPt labels corresponding to injector positions labelList injectorTetPts_; diff --git a/src/lagrangian/intermediate/submodels/ReactingMultiphase/InjectionModel/ReactingMultiphaseLookupTableInjection/ReactingMultiphaseLookupTableInjection.H b/src/lagrangian/intermediate/submodels/ReactingMultiphase/InjectionModel/ReactingMultiphaseLookupTableInjection/ReactingMultiphaseLookupTableInjection.H index aec5b91c0..a7a7462e0 100644 --- a/src/lagrangian/intermediate/submodels/ReactingMultiphase/InjectionModel/ReactingMultiphaseLookupTableInjection/ReactingMultiphaseLookupTableInjection.H +++ b/src/lagrangian/intermediate/submodels/ReactingMultiphase/InjectionModel/ReactingMultiphaseLookupTableInjection/ReactingMultiphaseLookupTableInjection.H @@ -90,13 +90,13 @@ class ReactingMultiphaseLookupTableInjection //- List of injectors reactingMultiphaseParcelInjectionDataIOList injectors_; - //- List of cell labels corresoponding to injector positions + //- List of cell labels corresponding to injector positions labelList injectorCells_; - //- List of tetFace labels corresoponding to injector positions + //- List of tetFace labels corresponding to injector positions labelList injectorTetFaces_; - //- List of tetPt labels corresoponding to injector positions + //- List of tetPt labels corresponding to injector positions labelList injectorTetPts_; diff --git a/src/lagrangian/intermediate/submodels/Thermodynamic/SurfaceFilmModel/ThermoSurfaceFilm/ThermoSurfaceFilm.H b/src/lagrangian/intermediate/submodels/Thermodynamic/SurfaceFilmModel/ThermoSurfaceFilm/ThermoSurfaceFilm.H index f54fc1e88..39ecdbd08 100644 --- a/src/lagrangian/intermediate/submodels/Thermodynamic/SurfaceFilmModel/ThermoSurfaceFilm/ThermoSurfaceFilm.H +++ b/src/lagrangian/intermediate/submodels/Thermodynamic/SurfaceFilmModel/ThermoSurfaceFilm/ThermoSurfaceFilm.H @@ -28,7 +28,7 @@ Description Thermo parcel surface film model. Responsible for: - - injecting parcelss from the film model into the cloud, e.g. for dripping + - injecting parcels from the film model into the cloud, e.g. for dripping - parcel interaction with the film, e.g absorb, bounce, splash Splash model references: diff --git a/src/mesh/blockMesh/blockEdges/lineDivide/lineDivide.C b/src/mesh/blockMesh/blockEdges/lineDivide/lineDivide.C index 1c746efa3..d4a6d7092 100644 --- a/src/mesh/blockMesh/blockEdges/lineDivide/lineDivide.C +++ b/src/mesh/blockMesh/blockEdges/lineDivide/lineDivide.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -30,7 +30,7 @@ License namespace Foam { - //- Calculate the geometric expension factor from the expansion ratio + //- Calculate the geometric expansion factor from the expansion ratio inline scalar calcGexp(const scalar expRatio, const label nDiv) { return nDiv > 1 ? pow(expRatio, 1.0/(nDiv - 1)) : 0.0; diff --git a/src/mesh/blockMesh/blockVertices/projectVertex/projectVertex.H b/src/mesh/blockMesh/blockVertices/projectVertex/projectVertex.H index 370e9ba5a..caeba0d94 100644 --- a/src/mesh/blockMesh/blockVertices/projectVertex/projectVertex.H +++ b/src/mesh/blockMesh/blockVertices/projectVertex/projectVertex.H @@ -25,7 +25,7 @@ Class Foam::blockVertices::projectVertex Description - Projects the vertex onto the selected surfacees of the + Projects the vertex onto the selected surfaces of the geometry provided as a searchableSurfaces object. SourceFiles diff --git a/src/mesh/snappyHexMesh/externalDisplacementMeshMover/medialAxisMeshMover.C b/src/mesh/snappyHexMesh/externalDisplacementMeshMover/medialAxisMeshMover.C index ad818dfe7..711b5c5f9 100644 --- a/src/mesh/snappyHexMesh/externalDisplacementMeshMover/medialAxisMeshMover.C +++ b/src/mesh/snappyHexMesh/externalDisplacementMeshMover/medialAxisMeshMover.C @@ -403,7 +403,8 @@ void Foam::medialAxisMeshMover::update(const dictionary& coeffDict) // Predetermine mesh edges // ~~~~~~~~~~~~~~~~~~~~~~~ - // Precalulate (mesh) master point/edge (only relevant for shared pts/edges) + // Precalculate (mesh) master point/edge + // (only relevant for shared pts/edges) const PackedBoolList isMeshMasterPoint(syncTools::getMasterPoints(mesh())); const PackedBoolList isMeshMasterEdge(syncTools::getMasterEdges(mesh())); // Precalculate meshEdge per pp edge @@ -416,7 +417,7 @@ void Foam::medialAxisMeshMover::update(const dictionary& coeffDict) ) ); - // Precalulate (patch) master point/edge + // Precalculate (patch) master point/edge const PackedBoolList isPatchMasterPoint ( meshRefinement::getMasterPoints @@ -1757,7 +1758,7 @@ void Foam::medialAxisMeshMover::calculateDisplacement ); - // Precalulate master points/edge (only relevant for shared points/edges) + // Precalculate master points/edge (only relevant for shared points/edges) const PackedBoolList isMeshMasterPoint(syncTools::getMasterPoints(mesh())); const PackedBoolList isMeshMasterEdge(syncTools::getMasterEdges(mesh())); // Precalculate meshEdge per pp edge @@ -1770,7 +1771,7 @@ void Foam::medialAxisMeshMover::calculateDisplacement ) ); - // Precalulate (patch) master point/edge + // Precalculate (patch) master point/edge const PackedBoolList isPatchMasterPoint ( meshRefinement::getMasterPoints @@ -1935,7 +1936,7 @@ void Foam::medialAxisMeshMover::calculateDisplacement patchDisp ); - // Update thickess for changed extrusion + // Update thickness for changed extrusion forAll(thickness, patchPointi) { if (extrudeStatus[patchPointi] == snappyLayerDriver::NOEXTRUDE) diff --git a/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriverShrink.C b/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriverShrink.C index 1d7bd8d5d..da3177250 100644 --- a/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriverShrink.C +++ b/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriverShrink.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -886,7 +886,7 @@ void Foam::snappyLayerDriver::medialAxisSmoothingInfo // Predetermine mesh edges // ~~~~~~~~~~~~~~~~~~~~~~~ - // Precalulate master point/edge (only relevant for shared points/edges) + // Precalculate master point/edge (only relevant for shared points/edges) const PackedBoolList isMasterPoint(syncTools::getMasterPoints(mesh)); const PackedBoolList isMasterEdge(syncTools::getMasterEdges(mesh)); // Precalculate meshEdge per pp edge @@ -1378,7 +1378,7 @@ void Foam::snappyLayerDriver::shrinkMeshMedialDistance const indirectPrimitivePatch& pp = meshMover.patch(); const labelList& meshPoints = pp.meshPoints(); - // Precalulate master points/edge (only relevant for shared points/edges) + // Precalculate master points/edge (only relevant for shared points/edges) const PackedBoolList isMasterPoint(syncTools::getMasterPoints(mesh)); const PackedBoolList isMasterEdge(syncTools::getMasterEdges(mesh)); // Precalculate meshEdge per pp edge @@ -1536,7 +1536,7 @@ void Foam::snappyLayerDriver::shrinkMeshMedialDistance patchNLayers ); - // Update thickess for changed extrusion + // Update thickness for changed extrusion forAll(thickness, patchPointi) { if (extrudeStatus[patchPointi] == NOEXTRUDE) diff --git a/src/meshTools/polyMeshZipUpCells/polyMeshZipUpCells.H b/src/meshTools/polyMeshZipUpCells/polyMeshZipUpCells.H index 9eaa1cd1a..18fd17ab2 100644 --- a/src/meshTools/polyMeshZipUpCells/polyMeshZipUpCells.H +++ b/src/meshTools/polyMeshZipUpCells/polyMeshZipUpCells.H @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -28,7 +28,7 @@ Description Cell zip-up tool. This function modifies the list of faces such that all the cells are topologically closed. Note that, while this operation is perfectly sensible for correct meshes, it may - lead to arbitryary errors if the mesh is originally broken. + lead to arbitrary errors if the mesh is originally broken. SourceFiles polyMeshZipUpCells.C diff --git a/src/meshTools/regionCoupled/patches/regionCoupledPolyPatch/regionCoupledBase.H b/src/meshTools/regionCoupled/patches/regionCoupledPolyPatch/regionCoupledBase.H index 3473452d9..c0c87ff99 100644 --- a/src/meshTools/regionCoupled/patches/regionCoupledPolyPatch/regionCoupledBase.H +++ b/src/meshTools/regionCoupled/patches/regionCoupledPolyPatch/regionCoupledBase.H @@ -25,7 +25,7 @@ Class Foam::regionCoupledBase Description - Base class with common functinality for regionCoupled polyPatch. + Base class with common functionality for regionCoupled polyPatch. It includes AMI. diff --git a/src/meshTools/regionSplit/localPointRegion.C b/src/meshTools/regionSplit/localPointRegion.C index 280157290..e01a71166 100644 --- a/src/meshTools/regionSplit/localPointRegion.C +++ b/src/meshTools/regionSplit/localPointRegion.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -593,7 +593,7 @@ Foam::List<Foam::labelPair> Foam::localPointRegion::findDuplicateFacePairs + mesh.nInternalFaces() ); - // Find correspondencing baffle face (or -1) + // Find corresponding baffle face (or -1) const labelList duplicateFace(findDuplicateFaces(mesh, testFaces)); // Convert into list of coupled face pairs (mesh face labels). diff --git a/src/meshTools/sets/cellSources/fieldToCell/fieldToCell.C b/src/meshTools/sets/cellSources/fieldToCell/fieldToCell.C index 30cb3fe5f..ef195a76c 100644 --- a/src/meshTools/sets/cellSources/fieldToCell/fieldToCell.C +++ b/src/meshTools/sets/cellSources/fieldToCell/fieldToCell.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -159,7 +159,7 @@ void Foam::fieldToCell::applyToSet false ); - // Note: should check for volScalarField but that introduces depencendy + // Note: should check for volScalarField but that introduces dependency // on volMesh so just use another type with processor-local scope if (!fieldObject.typeHeaderOk<labelIOList>(false)) { diff --git a/src/regionModels/surfaceFilmModels/kinematicSingleLayer/kinematicSingleLayer.C b/src/regionModels/surfaceFilmModels/kinematicSingleLayer/kinematicSingleLayer.C index 9aa0d51eb..5652d3984 100644 --- a/src/regionModels/surfaceFilmModels/kinematicSingleLayer/kinematicSingleLayer.C +++ b/src/regionModels/surfaceFilmModels/kinematicSingleLayer/kinematicSingleLayer.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -125,7 +125,7 @@ void kinematicSingleLayer::transferPrimaryRegionSourceFields() volScalarField::Boundary& pSpPrimaryBf = pSpPrimary_.boundaryFieldRef(); - // Convert accummulated source terms into per unit area per unit time + // Convert accumulated source terms into per unit area per unit time const scalar deltaT = time_.deltaTValue(); forAll(rhoSpPrimary_.boundaryField(), patchi) { diff --git a/src/regionModels/surfaceFilmModels/submodels/thermo/filmViscosityModel/thixotropicViscosity/thixotropicViscosity.H b/src/regionModels/surfaceFilmModels/submodels/thermo/filmViscosityModel/thixotropicViscosity/thixotropicViscosity.H index 78280aaf7..638e93fb6 100644 --- a/src/regionModels/surfaceFilmModels/submodels/thermo/filmViscosityModel/thixotropicViscosity/thixotropicViscosity.H +++ b/src/regionModels/surfaceFilmModels/submodels/thermo/filmViscosityModel/thixotropicViscosity/thixotropicViscosity.H @@ -111,7 +111,7 @@ protected: //- Limiting viscosity when lambda = 0 dimensionedScalar muInf_; - //- Model coeffiicient + //- Model coefficient dimensionedScalar K_; //- Structural parameter diff --git a/src/regionModels/surfaceFilmModels/submodels/thermo/heatTransferModel/mappedConvectiveHeatTransfer/mappedConvectiveHeatTransfer.H b/src/regionModels/surfaceFilmModels/submodels/thermo/heatTransferModel/mappedConvectiveHeatTransfer/mappedConvectiveHeatTransfer.H index 604521e80..c5d5a8b92 100644 --- a/src/regionModels/surfaceFilmModels/submodels/thermo/heatTransferModel/mappedConvectiveHeatTransfer/mappedConvectiveHeatTransfer.H +++ b/src/regionModels/surfaceFilmModels/submodels/thermo/heatTransferModel/mappedConvectiveHeatTransfer/mappedConvectiveHeatTransfer.H @@ -62,7 +62,7 @@ class mappedConvectiveHeatTransfer volScalarField htcConvPrimary_; //- Heat transfer coefficient - film region [W/m^2/K] - // Assumes that the primary regtion to film region boundaries are + // Assumes that the primary region to film region boundaries are // described as mappedPushed types volScalarField htcConvFilm_; diff --git a/src/rigidBodyDynamics/rigidBodySolvers/symplectic/symplectic.C b/src/rigidBodyDynamics/rigidBodySolvers/symplectic/symplectic.C index bcece5f0e..dcdd99cf5 100644 --- a/src/rigidBodyDynamics/rigidBodySolvers/symplectic/symplectic.C +++ b/src/rigidBodyDynamics/rigidBodySolvers/symplectic/symplectic.C @@ -67,7 +67,7 @@ void Foam::RBD::rigidBodySolvers::symplectic::solve const Field<spatialVector>& fx ) { - // First simplectic step: + // First symplectic step: // Half-step for linear and angular velocities // Update position and orientation qDot() = qDot0() + 0.5deltaT0()qDdot(); @@ -87,7 +87,7 @@ void Foam::RBD::rigidBodySolvers::symplectic::solve // and restraint forces model_.forwardDynamics(state(), rtau, rfx); - // Second simplectic step: + // Second symplectic step: // Complete update of linear and angular velocities qDot() += 0.5deltaT()qDdot(); } diff --git a/src/sampling/meshToMesh/meshToMesh.H b/src/sampling/meshToMesh/meshToMesh.H index c2a92904b..43a429529 100644 --- a/src/sampling/meshToMesh/meshToMesh.H +++ b/src/sampling/meshToMesh/meshToMesh.H @@ -103,7 +103,7 @@ private: //- Target to source cell addressing labelListList tgtToSrcCellAddr_; - //- Source to target cell interplation weights + //- Source to target cell interpolation weights scalarListList srcToTgtCellWght_; //- Target to source cell interpolation weights @@ -239,7 +239,7 @@ private: List<labelList>& procLocalFaceIDs ) const; - //- Collect pieces of tgt mesh from other procssors and restructure + //- Collect pieces of tgt mesh from other processors and restructure void distributeAndMergeCells ( const mapDistribute& map, diff --git a/src/sampling/sampledSurface/sampledPlane/sampledPlane.H b/src/sampling/sampledSurface/sampledPlane/sampledPlane.H index be9a88083..7013deb3d 100644 --- a/src/sampling/sampledSurface/sampledPlane/sampledPlane.H +++ b/src/sampling/sampledSurface/sampledPlane/sampledPlane.H @@ -26,7 +26,7 @@ Class Description A sampledSurface defined by a plane which 'cuts' the mesh using the - cuttingPlane alorithm. The plane is triangulated by default. + cuttingPlane algorithm. The plane is triangulated by default. Note Does not actually cut until update() called. diff --git a/src/sixDoFRigidBodyMotion/sixDoFRigidBodyMotion/sixDoFRigidBodyMotion.C b/src/sixDoFRigidBodyMotion/sixDoFRigidBodyMotion/sixDoFRigidBodyMotion.C index 945a365ed..fb3b8eced 100644 --- a/src/sixDoFRigidBodyMotion/sixDoFRigidBodyMotion/sixDoFRigidBodyMotion.C +++ b/src/sixDoFRigidBodyMotion/sixDoFRigidBodyMotion/sixDoFRigidBodyMotion.C @@ -357,7 +357,7 @@ Foam::tmp<Foam::pointField> Foam::sixDoFRigidBodyMotion::transform const scalarField& scale ) const { - // Calculate the transformation septerion from the initial state + // Calculate the transformation septernion from the initial state septernion s ( centreOfRotation() - initialCentreOfRotation(), diff --git a/src/sixDoFRigidBodyMotion/sixDoFSolvers/symplectic/symplectic.C b/src/sixDoFRigidBodyMotion/sixDoFSolvers/symplectic/symplectic.C index d4724d53d..a7c8c6416 100644 --- a/src/sixDoFRigidBodyMotion/sixDoFSolvers/symplectic/symplectic.C +++ b/src/sixDoFRigidBodyMotion/sixDoFSolvers/symplectic/symplectic.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2015-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2015-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -67,7 +67,7 @@ void Foam::sixDoFSolvers::symplectic::solve scalar deltaT0 ) { - // First simplectic step: + // First symplectic step: // Half-step for linear and angular velocities // Update position and orientation @@ -83,7 +83,7 @@ void Foam::sixDoFSolvers::symplectic::solve // Update the linear acceleration and torque updateAcceleration(fGlobal, tauGlobal); - // Second simplectic step: + // Second symplectic step: // Complete update of linear and angular velocities v() += tConstraints() & aDamp()0.5deltaTa(); diff --git a/src/thermophysicalModels/chemistryModel/chemistryModel/BasicChemistryModel/BasicChemistryModels.C b/src/thermophysicalModels/chemistryModel/chemistryModel/BasicChemistryModel/BasicChemistryModels.C index 09e1b2979..398547354 100644 --- a/src/thermophysicalModels/chemistryModel/chemistryModel/BasicChemistryModel/BasicChemistryModels.C +++ b/src/thermophysicalModels/chemistryModel/chemistryModel/BasicChemistryModel/BasicChemistryModels.C @@ -275,7 +275,7 @@ namespace Foam ); - // Chemistry moldels based on sensibleInternalEnergy + // Chemistry models based on sensibleInternalEnergy makeChemistryModelType ( StandardChemistryModel, diff --git a/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/TDACChemistryModel.H b/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/TDACChemistryModel.H index 30400754d..631a51c91 100644 --- a/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/TDACChemistryModel.H +++ b/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/TDACChemistryModel.H @@ -181,7 +181,7 @@ public: ) const; //- Return the reaction rate for reaction r and the reference - // species and charateristic times + // species and characteristic times virtual scalar omega ( const Reaction<ThermoType>& r, diff --git a/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/reduction/DAC/DAC.H b/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/reduction/DAC/DAC.H index ff9603698..2474bb02b 100644 --- a/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/reduction/DAC/DAC.H +++ b/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/reduction/DAC/DAC.H @@ -37,7 +37,7 @@ Description CA = sum_i=1->Nr (max (0, -vAi wi)) -> consumption of species A where i is the reaction index, Nr the number of reactions, vAi is the net - stoechiometric coefficient of species A in the ith reaction (vAi = v''-v') + stoichiometric coefficient of species A in the ith reaction (vAi = v''-v') , wi is the progress variable of reaction i and dBi equals 1 if reaction i involves B and O otherwise. rAB show the error introduced to the production rates of A when B and all diff --git a/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/reduction/DRGEP/DRGEP.H b/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/reduction/DRGEP/DRGEP.H index 267cd624d..fb4e37342 100644 --- a/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/reduction/DRGEP/DRGEP.H +++ b/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/reduction/DRGEP/DRGEP.H @@ -36,7 +36,7 @@ Description CA = sum_i=1->Nr (max (0, -vAi wi)) -> consumption of species A where i is the reaction index, Nr the number of reactions, vAi is the net - stoechiometric coefficient of species A in the ith reaction (vAi = v''-v') + stoichiometric coefficient of species A in the ith reaction (vAi = v''-v') , wi is the progress variable of reaction i and dBi equals 1 if reaction i involves B and O otherwise. rAB show the error introduced to the production rates of A when B and all @@ -74,7 +74,7 @@ Description Pa = sum_speciesS NSa max(0, PS-CS) where 'a' refers to different elements present in the system - (namely C, H, O and N for conventionail hydrocarbon combustion), + (namely C, H, O and N for conventional hydrocarbon combustion), NTa is the number of element a in species T. When this coefficient alpha is below the specified threshold, the species is removed from the search initiating set. In the original paper from diff --git a/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/tabulation/ISAT/binaryTree/binaryTree.H b/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/tabulation/ISAT/binaryTree/binaryTree.H index ae146cf00..9294391c2 100644 --- a/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/tabulation/ISAT/binaryTree/binaryTree.H +++ b/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/tabulation/ISAT/binaryTree/binaryTree.H @@ -92,7 +92,7 @@ private: ); //- Perform a search in the subtree starting from the subtree node y - // This search continue to use the hyperplan to walk the tree + // This search continues to use the hyperplane to walk the tree // If covering EOA is found return true and x points to the chemPoint bool inSubTree ( diff --git a/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/tabulation/ISAT/chemPointISAT/chemPointISAT.H b/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/tabulation/ISAT/chemPointISAT/chemPointISAT.H index 57efe9f2e..35debae86 100644 --- a/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/tabulation/ISAT/chemPointISAT/chemPointISAT.H +++ b/src/thermophysicalModels/chemistryModel/chemistryModel/TDACChemistryModel/tabulation/ISAT/chemPointISAT/chemPointISAT.H @@ -54,7 +54,7 @@ Description epsGrow = \|\|B.(dR - dRl)\|\|, with dR = Rphiq - Rphi, dRl = A.dphi and B the diagonal scale factor matrix. - If epsGrow <= tolerance, the EOA is too conservative and a GROW is perforned + If epsGrow <= tolerance, the EOA is too conservative and a GROW is performed otherwise, the newly computed mapping is associated to the initial composition and added to the tree. @@ -87,9 +87,9 @@ Description And L' = UD'V^T, with D' the diagonal matrix with the modified di'. Grow the EOA : - More details about the minimum-volume ellipsoid covering an ellispoid E and + More details about the minimum-volume ellipsoid covering an ellipsoid E and a point p are found in [3]. Here is the main steps to obtain the modified - matrix L' describind the new ellipsoid. + matrix L' describing the new ellipsoid. 1) calculate the point p' in the transformed space : p' = L^T.(p-phi) 2) compute the rank-one decomposition: @@ -408,9 +408,9 @@ public: bool inEOA(const scalarField& phiq); //- More details about the minimum-volume ellipsoid covering an - // ellispoid E and a point p are found in [1]. + // ellipsoid E and a point p are found in [1]. // Here is the main steps to obtain the - // modified matrix L' describind the new ellipsoid. + // modified matrix L' describing the new ellipsoid. // 1) calculate the point p' in the transformed space : // p' = L^T.(p-phi) // 2) compute the rank-one decomposition: @@ -426,7 +426,7 @@ public: //- If phiq is not in the EOA, then the mapping is computed. // But as the EOA is a conservative approximation of the region of // accuracy surrounding the point phi, we could expand it by - // comparing thecomputed results with the one obtained by linear + // comparing the computed results with the one obtained by linear // interpolation. The error eps is calculated: // eps = \|\|B.(dR - dRl)\|\|, // with dR = Rphiq - Rphi, dRl = A.dphi and B the diagonal scale diff --git a/src/thermophysicalModels/specie/thermo/thermo/thermo.H b/src/thermophysicalModels/specie/thermo/thermo/thermo.H index 423351d5f..0738dd76a 100644 --- a/src/thermophysicalModels/specie/thermo/thermo/thermo.H +++ b/src/thermophysicalModels/specie/thermo/thermo/thermo.H @@ -321,7 +321,8 @@ public: // Derivative term used for Jacobian - //- Derivative of B (acooding to Niemeyer et al.) w.r.t. temperature + //- Derivative of B (according to Niemeyer et al.) + // w.r.t. temperature inline scalar dKcdTbyKc(const scalar p, const scalar T) const; //- Derivative of cp w.r.t. temperature diff --git a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C12H26/C12H26.H b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C12H26/C12H26.H index 558398ad4..477720b1c 100644 --- a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C12H26/C12H26.H +++ b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C12H26/C12H26.H @@ -90,7 +90,7 @@ public: //- Construct null C12H26(); - //- Construct from conponents + //- Construct from components C12H26 ( const liquidProperties& l, diff --git a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C3H6O/C3H6O.H b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C3H6O/C3H6O.H index 64296353b..5c85aaf5e 100644 --- a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C3H6O/C3H6O.H +++ b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C3H6O/C3H6O.H @@ -90,7 +90,7 @@ public: //- Construct null C3H6O(); - //- Construct from compoents + //- Construct from components C3H6O ( const liquidProperties& l, diff --git a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C6H6/C6H6.H b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C6H6/C6H6.H index 229b53b72..6d3a41fdf 100644 --- a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C6H6/C6H6.H +++ b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/C6H6/C6H6.H @@ -90,7 +90,7 @@ public: //- Construct null C6H6(); - //- Comstruct from components + //- Construct from components C6H6 ( const liquidProperties& l, diff --git a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/aC10H7CH3/aC10H7CH3.H b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/aC10H7CH3/aC10H7CH3.H index 092a84bd6..61e8725a9 100644 --- a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/aC10H7CH3/aC10H7CH3.H +++ b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/aC10H7CH3/aC10H7CH3.H @@ -90,7 +90,7 @@ public: //- Construct null aC10H7CH3(); - //- Constrcut from components + //- Construct from components aC10H7CH3 ( const liquidProperties& l, diff --git a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/iC3H8O/iC3H8O.H b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/iC3H8O/iC3H8O.H index 1f1b76ff1..6563e3c0d 100644 --- a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/iC3H8O/iC3H8O.H +++ b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/iC3H8O/iC3H8O.H @@ -88,7 +88,7 @@ public: //- Construct null iC3H8O(); - //- Constrcut from components + //- Construct from components iC3H8O ( const liquidProperties& l, diff --git a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/liquidProperties/liquidProperties.H b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/liquidProperties/liquidProperties.H index f2a1da9a4..5f76b8cb2 100644 --- a/src/thermophysicalModels/thermophysicalProperties/liquidProperties/liquidProperties/liquidProperties.H +++ b/src/thermophysicalModels/thermophysicalProperties/liquidProperties/liquidProperties/liquidProperties.H @@ -175,7 +175,7 @@ public: //- Critical volume [m^3/kmol] inline scalar Vc() const; - //- Critical compressibilty factor + //- Critical compressibility factor inline scalar Zc() const; //- Triple point temperature [K] @@ -190,7 +190,7 @@ public: //- Dipole moment [] inline scalar dipm() const; - //- Pitzer's ascentric factor [] + //- Pitzer's acentric factor [] inline scalar omega() const; //- Solubility parameter [(J/m^3)^(1/2)] @@ -266,7 +266,7 @@ public: virtual scalar D(scalar p, scalar T, scalar Wb) const = 0; //- Invert the vapour pressure relationship to retrieve the - // boiling temperuture as a function of pressure + // boiling temperature as a function of pressure virtual scalar pvInvert(scalar p) const; diff --git a/src/waves/waveModels/Airy/Airy.H b/src/waves/waveModels/Airy/Airy.H index 18e1b4239..418597fa3 100644 --- a/src/waves/waveModels/Airy/Airy.H +++ b/src/waves/waveModels/Airy/Airy.H @@ -90,7 +90,7 @@ protected: const scalarField& x ) const; - //- Return whether shallow and intermdiate effects are to be omitted + //- Return whether shallow and intermediate effects are to be omitted bool deep() const; //- Return the non-dimensionalised i-th harmonic of the velocity diff --git a/tutorials/combustion/fireFoam/LES/smallPoolFire2D/constant/radiationProperties b/tutorials/combustion/fireFoam/LES/smallPoolFire2D/constant/radiationProperties index 3635ef16a..7aa097f7c 100644 --- a/tutorials/combustion/fireFoam/LES/smallPoolFire2D/constant/radiationProperties +++ b/tutorials/combustion/fireFoam/LES/smallPoolFire2D/constant/radiationProperties @@ -48,7 +48,7 @@ greyMeanCombustionCoeffs CO2 { Tcommon 200; // Common Temp - invTemp true; // Is the polynomio using inverse temperature. + invTemp true; // Is the polynomial using inverse temperature. Tlow 200; // Low Temp Thigh 2500; // High Temp diff --git a/tutorials/combustion/fireFoam/LES/smallPoolFire3D/constant/radiationProperties b/tutorials/combustion/fireFoam/LES/smallPoolFire3D/constant/radiationProperties index 1e7fac643..c57c95afe 100644 --- a/tutorials/combustion/fireFoam/LES/smallPoolFire3D/constant/radiationProperties +++ b/tutorials/combustion/fireFoam/LES/smallPoolFire3D/constant/radiationProperties @@ -49,7 +49,7 @@ greyMeanCombustionCoeffs CO2 { Tcommon 200; // Common Temp - invTemp true; // Is the polynomio using inverse temperature. + invTemp true; // Is the polynomial using inverse temperature. Tlow 200; // Low Temp Thigh 2500; // High Temp diff --git a/tutorials/combustion/reactingFoam/RAS/SandiaD_LTS/constant/radiationProperties b/tutorials/combustion/reactingFoam/RAS/SandiaD_LTS/constant/radiationProperties index 118b4acdf..151ddee4b 100644 --- a/tutorials/combustion/reactingFoam/RAS/SandiaD_LTS/constant/radiationProperties +++ b/tutorials/combustion/reactingFoam/RAS/SandiaD_LTS/constant/radiationProperties @@ -34,7 +34,7 @@ greyMeanCombustionCoeffs CO2 { Tcommon 200; // Common Temp - invTemp true; // Is the polynomio using inverse temperature. + invTemp true; // Is the polynomial using inverse temperature. Tlow 200; // Low Temp Thigh 2500; // High Temp typos_in_comments.diff (157,985 bytes) typos_in_code.diff (28,903 bytes) diff --git a/applications/test/CompactListList/Test-CompactListList.C b/applications/test/CompactListList/Test-CompactListList.C index ab5911d2b..991275823 100644 --- a/applications/test/CompactListList/Test-CompactListList.C +++ b/applications/test/CompactListList/Test-CompactListList.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -145,7 +145,7 @@ int main(int argc, char argv[]) fcs[1] = face(labelList(2, 222)); CompactListList<label, face> compactFcs(fcs); - Info<< "comactFcs:" << compactFcs << endl; + Info<< "compactFcs:" << compactFcs << endl; faceList fcs2 = compactFcs(); Info<< "fcs2:" << fcs2 << endl; diff --git a/applications/test/alloc/Test-new.C b/applications/test/alloc/Test-new.C index 7609172b0..050c19349 100644 --- a/applications/test/alloc/Test-new.C +++ b/applications/test/alloc/Test-new.C @@ -22,7 +22,7 @@ main() cerr << "deallocated ints\n"; - cerr << "alloacting doubles\n"; + cerr << "allocating doubles\n"; double doubles = new double[500000]; diff --git a/applications/utilities/mesh/advanced/modifyMesh/modifyMesh.C b/applications/utilities/mesh/advanced/modifyMesh/modifyMesh.C index 0ccbe5132..388171897 100644 --- a/applications/utilities/mesh/advanced/modifyMesh/modifyMesh.C +++ b/applications/utilities/mesh/advanced/modifyMesh/modifyMesh.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -517,7 +517,7 @@ int main(int argc, char argv[]) { Info<< "Could not insert mesh edge " << edgeI << " for input point " << pts.first() << nl - << "Perhaps the edge is already marked for collaping?" << endl; + << "Perhaps the edge is already marked for collapsing?" << endl; validInputs = false; } diff --git a/applications/utilities/mesh/conversion/plot3dToFoam/hexBlock.C b/applications/utilities/mesh/conversion/plot3dToFoam/hexBlock.C index b3d0d748b..95a2f1a58 100644 --- a/applications/utilities/mesh/conversion/plot3dToFoam/hexBlock.C +++ b/applications/utilities/mesh/conversion/plot3dToFoam/hexBlock.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -112,7 +112,7 @@ hexBlock::hexBlock(const label nx, const label ny, const label nz) void hexBlock::readPoints ( const bool readBlank, - const scalar twoDThicknes, + const scalar twoDThickness, Istream& is ) { @@ -120,7 +120,7 @@ void hexBlock::readPoints label nPoints = points_.size(); - if (twoDThicknes > 0) + if (twoDThickness > 0) { nPoints /= 2; } @@ -137,7 +137,7 @@ void hexBlock::readPoints is >> points_[i].y(); } - if (twoDThicknes > 0) + if (twoDThickness > 0) { Info<< "Extruding " << nPoints << " points in z direction..." << endl; // Duplicate points @@ -148,7 +148,7 @@ void hexBlock::readPoints for (label i=0; i < nPoints; i++) { points_[i].z() = 0; - points_[i+nPoints].z() = twoDThicknes; + points_[i+nPoints].z() = twoDThickness; } } else diff --git a/applications/utilities/mesh/conversion/plot3dToFoam/hexBlock.H b/applications/utilities/mesh/conversion/plot3dToFoam/hexBlock.H index 8ca50256b..e54df8ec9 100644 --- a/applications/utilities/mesh/conversion/plot3dToFoam/hexBlock.H +++ b/applications/utilities/mesh/conversion/plot3dToFoam/hexBlock.H @@ -149,7 +149,7 @@ public: void readPoints ( const bool readBlank, - const scalar twoDThicknes, + const scalar twoDThickness, Istream& ); }; diff --git a/applications/utilities/mesh/conversion/sammToFoam/fixCollapsedEdges.C b/applications/utilities/mesh/conversion/sammToFoam/fixCollapsedEdges.C index 133215288..ca667488e 100644 --- a/applications/utilities/mesh/conversion/sammToFoam/fixCollapsedEdges.C +++ b/applications/utilities/mesh/conversion/sammToFoam/fixCollapsedEdges.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -93,7 +93,7 @@ void Foam::sammMesh::fixCollapsedEdges() forAll(vertexLabels, vI) { // In order for a face to be a valid entity, duplicate - // vertices can only be consecutive (othervise, the + // vertices can only be consecutive (otherwise, the // collapse creates an invalid face). We shall use this // property in the creation of the collapsed face @@ -130,7 +130,7 @@ void Foam::sammMesh::fixCollapsedEdges() { FatalErrorInFunction << "face " << facei << " of cell " << celli - << " is colapsed down to a point or edge, which is " + << " is collapsed down to a point or edge, which is " << "not permitted" << endl << "original face: " << vertexLabels << endl << "purged face: " << newFace << endl diff --git a/applications/utilities/mesh/conversion/star3ToFoam/fixCollapsedEdges.C b/applications/utilities/mesh/conversion/star3ToFoam/fixCollapsedEdges.C index 87bc29b29..a01ebc0fc 100644 --- a/applications/utilities/mesh/conversion/star3ToFoam/fixCollapsedEdges.C +++ b/applications/utilities/mesh/conversion/star3ToFoam/fixCollapsedEdges.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -92,7 +92,7 @@ void Foam::starMesh::fixCollapsedEdges() forAll(vertexLabels, vI) { // In order for a face to be a valid entity, duplicate - // vertices can only be consecutive (othervise, the + // vertices can only be consecutive (otherwise, the // collapse creates an invalid face). We shall use this // property in the creation of the collapsed face @@ -129,7 +129,7 @@ void Foam::starMesh::fixCollapsedEdges() { FatalErrorInFunction << "Face " << facei << " of cell " << celli - << " is colapsed down to a point or edge, which is " + << " is collapsed down to a point or edge, which is " << "not permitted" << endl << "original face: " << vertexLabels << endl << "purged face: " << newFace << endl diff --git a/applications/utilities/mesh/conversion/tetgenToFoam/tetgenToFoam.C b/applications/utilities/mesh/conversion/tetgenToFoam/tetgenToFoam.C index d4846b1db..1e57763b4 100644 --- a/applications/utilities/mesh/conversion/tetgenToFoam/tetgenToFoam.C +++ b/applications/utilities/mesh/conversion/tetgenToFoam/tetgenToFoam.C @@ -268,7 +268,7 @@ int main(int argc, char argv[]) if (nElemAttr != 0) { WarningInFunction - << "Element attributes (third elemenent in .ele header)" + << "Element attributes (third element in .ele header)" << " not used" << endl; } diff --git a/applications/utilities/thermophysical/chemkinToFoam/chemkinReader/chemkinReader.H b/applications/utilities/thermophysical/chemkinToFoam/chemkinReader/chemkinReader.H index e30e881c9..8f55e2604 100644 --- a/applications/utilities/thermophysical/chemkinToFoam/chemkinReader/chemkinReader.H +++ b/applications/utilities/thermophysical/chemkinToFoam/chemkinReader/chemkinReader.H @@ -232,7 +232,7 @@ private: void checkCoeffs ( const scalarList& reactionCoeffs, - const char* reationRateName, + const char* reactionRateName, const label nCoeffs ) const; diff --git a/src/OpenFOAM/matrices/LduMatrix/LduMatrix/LduMatrixPreconditioner.C b/src/OpenFOAM/matrices/LduMatrix/LduMatrix/LduMatrixPreconditioner.C index 7f1142462..2264a98db 100644 --- a/src/OpenFOAM/matrices/LduMatrix/LduMatrix/LduMatrixPreconditioner.C +++ b/src/OpenFOAM/matrices/LduMatrix/LduMatrix/LduMatrixPreconditioner.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -94,7 +94,7 @@ Foam::LduMatrix<Type, DType, LUType>::preconditioner::New FatalIOErrorInFunction ( preconditionerDict - ) << "cannot preconditione incomplete matrix, " + ) << "cannot precondition incomplete matrix, " "no diagonal or off-diagonal coefficient" << exit(FatalIOError); diff --git a/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/interfaces/processorGAMGInterface/processorGAMGInterface.C b/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/interfaces/processorGAMGInterface/processorGAMGInterface.C index bca58cde0..8eaff8df6 100644 --- a/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/interfaces/processorGAMGInterface/processorGAMGInterface.C +++ b/src/OpenFOAM/matrices/lduMatrix/solvers/GAMG/interfaces/processorGAMGInterface/processorGAMGInterface.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -142,7 +142,7 @@ Foam::processorGAMGInterface::processorGAMGInterface const label index, const lduInterfacePtrsList& coarseInterfaces, const labelUList& faceCells, - const labelUList& faceRestrictAddresssing, + const labelUList& faceRestrictAddressing, const label coarseComm, const label myProcNo, const label neighbProcNo, @@ -155,7 +155,7 @@ Foam::processorGAMGInterface::processorGAMGInterface index, coarseInterfaces, faceCells, - faceRestrictAddresssing + faceRestrictAddressing ), comm_(coarseComm), myProcNo_(myProcNo), diff --git a/src/dynamicMesh/polyTopoChange/polyTopoChange/hexRef8/hexRef8.C b/src/dynamicMesh/polyTopoChange/polyTopoChange/hexRef8/hexRef8.C index 3358a0604..1e0748237 100644 --- a/src/dynamicMesh/polyTopoChange/polyTopoChange/hexRef8/hexRef8.C +++ b/src/dynamicMesh/polyTopoChange/polyTopoChange/hexRef8/hexRef8.C @@ -5642,7 +5642,7 @@ void Foam::hexRef8::setUnrefinement if (facesToRemove.size() != splitFaces.size()) { FatalErrorInFunction - << "Ininitial set of split points to unrefine does not" + << "Initial set of split points to unrefine does not" << " seem to be consistent or not mid points of refined cells" << abort(FatalError); } @@ -5685,7 +5685,7 @@ void Foam::hexRef8::setUnrefinement if (region == -1) { FatalErrorInFunction - << "Ininitial set of split points to unrefine does not" + << "Initial set of split points to unrefine does not" << " seem to be consistent or not mid points" << " of refined cells" << nl << "cell:" << celli << " on splitPoint " << pointi diff --git a/src/lagrangian/DSMC/submodels/InflowBoundaryModel/FreeStream/FreeStream.C b/src/lagrangian/DSMC/submodels/InflowBoundaryModel/FreeStream/FreeStream.C index 0db5728fa..702711d40 100644 --- a/src/lagrangian/DSMC/submodels/InflowBoundaryModel/FreeStream/FreeStream.C +++ b/src/lagrangian/DSMC/submodels/InflowBoundaryModel/FreeStream/FreeStream.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -246,7 +246,7 @@ void Foam::FreeStream<CloudType>::inflow() // Cumulative triangle area fractions List<scalar> cTriAFracs(faceTets.size(), 0.0); - scalar previousCummulativeSum = 0.0; + scalar previousCumulativeSum = 0.0; forAll(faceTets, triI) { @@ -254,9 +254,9 @@ void Foam::FreeStream<CloudType>::inflow() cTriAFracs[triI] = faceTetIs.faceTri(mesh).mag()/fA - + previousCummulativeSum; + + previousCumulativeSum; - previousCummulativeSum = cTriAFracs[triI]; + previousCumulativeSum = cTriAFracs[triI]; } // Force the last area fraction value to 1.0 to avoid any diff --git a/src/lagrangian/molecularDynamics/molecule/mdTools/createAutoCorrelationFunctions.H b/src/lagrangian/molecularDynamics/molecule/mdTools/createAutoCorrelationFunctions.H index f5b726619..59cf32fc6 100644 --- a/src/lagrangian/molecularDynamics/molecule/mdTools/createAutoCorrelationFunctions.H +++ b/src/lagrangian/molecularDynamics/molecule/mdTools/createAutoCorrelationFunctions.H @@ -45,7 +45,7 @@ const dictionary& autocorrelationFunctionDict //- Velocity autocorrelation function -Info << tab << "velocty" << endl; +Info << tab << "velocity" << endl; const dictionary& velocityACFDict ( diff --git a/src/lagrangian/molecularDynamics/molecule/reducedUnits/reducedUnits.C b/src/lagrangian/molecularDynamics/molecule/reducedUnits/reducedUnits.C index 1168c67e8..e7a937556 100644 --- a/src/lagrangian/molecularDynamics/molecule/reducedUnits/reducedUnits.C +++ b/src/lagrangian/molecularDynamics/molecule/reducedUnits/reducedUnits.C @@ -42,7 +42,7 @@ void Foam::reducedUnits::calcRefValues() ) { FatalErrorInFunction - << "One of more referencence values too small for floating point " + << "One of more reference values too small for floating point " << "calculation: " << "refTime_ = " << refTime_ << ", refLength = " << refTemp_ diff --git a/src/mesh/snappyHexMesh/snappyHexMeshDriver/layerParameters/layerParameters.C b/src/mesh/snappyHexMesh/snappyHexMeshDriver/layerParameters/layerParameters.C index e949b8280..b8a16d630 100644 --- a/src/mesh/snappyHexMesh/snappyHexMeshDriver/layerParameters/layerParameters.C +++ b/src/mesh/snappyHexMesh/snappyHexMeshDriver/layerParameters/layerParameters.C @@ -392,8 +392,8 @@ Foam::layerParameters::layerParameters Foam::scalar Foam::layerParameters::layerThickness ( const label nLayers, - const scalar firstLayerThickess, - const scalar finalLayerThickess, + const scalar firstLayerThickness, + const scalar finalLayerThickness, const scalar totalThickness, const scalar expansionRatio ) const @@ -412,11 +412,11 @@ Foam::scalar Foam::layerParameters::layerThickness { if (mag(expansionRatio-1) < small) { - return firstLayerThickess * nLayers; + return firstLayerThickness * nLayers; } else { - return firstLayerThickess + return firstLayerThickness (1 - pow(expansionRatio, nLayers)) /(1 - expansionRatio); } @@ -427,13 +427,13 @@ Foam::scalar Foam::layerParameters::layerThickness { if (mag(expansionRatio-1) < small) { - return finalLayerThickess nLayers; + return finalLayerThickness * nLayers; } else { const scalar invExpansion = 1.0/expansionRatio; - return finalLayerThickess + return finalLayerThickness (1 - pow(invExpansion, nLayers)) /(1 - invExpansion); } @@ -453,8 +453,8 @@ Foam::scalar Foam::layerParameters::layerThickness Foam::scalar Foam::layerParameters::layerExpansionRatio ( const label nLayers, - const scalar firstLayerThickess, - const scalar finalLayerThickess, + const scalar firstLayerThickness, + const scalar finalLayerThickness, const scalar totalThickness, const scalar expansionRatio ) const @@ -474,7 +474,7 @@ Foam::scalar Foam::layerParameters::layerExpansionRatio return layerExpansionRatio ( nLayers, - totalThickness/firstLayerThickess + totalThickness/firstLayerThickness ); } break; @@ -486,7 +486,7 @@ Foam::scalar Foam::layerParameters::layerExpansionRatio /layerExpansionRatio ( nLayers, - totalThickness/finalLayerThickess + totalThickness/finalLayerThickness ); } break; @@ -504,8 +504,8 @@ Foam::scalar Foam::layerParameters::layerExpansionRatio Foam::scalar Foam::layerParameters::firstLayerThickness ( const label nLayers, - const scalar firstLayerThickess, - const scalar finalLayerThickess, + const scalar firstLayerThickness, + const scalar finalLayerThickness, const scalar totalThickness, const scalar expansionRatio ) const @@ -515,12 +515,12 @@ Foam::scalar Foam::layerParameters::firstLayerThickness case FIRST_AND_EXPANSION: case FIRST_AND_TOTAL: { - return firstLayerThickess; + return firstLayerThickness; } case FINAL_AND_EXPANSION: { - return finalLayerThickesspow(1.0/expansionRatio, nLayers-1); + return finalLayerThickness*pow(1.0/expansionRatio, nLayers-1); } break; @@ -529,13 +529,13 @@ Foam::scalar Foam::layerParameters::firstLayerThickness const scalar r = layerExpansionRatio ( nLayers, - firstLayerThickess, - finalLayerThickess, + firstLayerThickness, + finalLayerThickness, totalThickness, expansionRatio ); - return finalLayerThickess/pow(r, nLayers-1); + return finalLayerThickness/pow(r, nLayers-1); } break; diff --git a/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriver.C b/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriver.C index 185658ce6..e881c15cd 100644 --- a/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriver.C +++ b/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriver.C @@ -414,7 +414,7 @@ void Foam::snappyLayerDriver::handleFeatureAngle forAll(eFaces, i) { - nomalsCombine() + normalsCombine() ( edgeNormal[meshEdgeI], pp.faceNormals()[eFaces[i]] @@ -426,7 +426,7 @@ void Foam::snappyLayerDriver::handleFeatureAngle ( mesh, edgeNormal, - nomalsCombine(), + normalsCombine(), point::max // null value ); @@ -970,7 +970,7 @@ void Foam::snappyLayerDriver::determineSidePatches // Sometimes edges-to-be-extruded are on more than 2 processors. // Work out which 2 hold the faces to be extruded and thus which procpatch // the side-face should be in. As an additional complication this might - // mean that 2 procesors that were only edge-connected now suddenly need + // mean that 2 processors that were only edge-connected now suddenly need // to become face-connected i.e. have a processor patch between them. fvMesh& mesh = meshRefiner_.mesh(); @@ -2738,7 +2738,7 @@ bool Foam::snappyLayerDriver::writeLayerData faceRealThickness ); - // Convert patchReal to relavtive thickness + // Convert patchReal to relative thickness scalarField pfld(patchReal.size(), 0.0); forAll(patchReal, i) { diff --git a/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriver.H b/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriver.H index 325f87ee9..eab547072 100644 --- a/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriver.H +++ b/src/mesh/snappyHexMesh/snappyHexMeshDriver/snappyLayerDriver.H @@ -75,7 +75,7 @@ private: // Private classes //- Combine operator class to combine normal with other normal. - class nomalsCombine + class normalsCombine { public: diff --git a/src/meshTools/coordinateSystems/coordinateRotation/axesRotation.C b/src/meshTools/coordinateSystems/coordinateRotation/axesRotation.C index 444114970..b5acd3903 100644 --- a/src/meshTools/coordinateSystems/coordinateRotation/axesRotation.C +++ b/src/meshTools/coordinateSystems/coordinateRotation/axesRotation.C @@ -87,7 +87,7 @@ void Foam::axesRotation::calcTransform default: { FatalErrorInFunction - << "Unhandled axes specifictation" << endl + << "Unhandled axes specification" << endl << abort(FatalError); Rtr = Zero; diff --git a/src/meshTools/coordinateSystems/coordinateRotation/cylindrical.C b/src/meshTools/coordinateSystems/coordinateRotation/cylindrical.C index f6b63a18d..50f8ccb40 100644 --- a/src/meshTools/coordinateSystems/coordinateRotation/cylindrical.C +++ b/src/meshTools/coordinateSystems/coordinateRotation/cylindrical.C @@ -165,7 +165,7 @@ Foam::cylindrical::cylindrical(const dictionary& dict) { FatalErrorInFunction << " cylindrical can not be constructed from dictionary " - << " use the construtctor : " + << " use the constructor : " "(" " const dictionary&, const objectRegistry&" ")" diff --git a/src/meshTools/sets/cellSources/rotatedBoxToCell/rotatedBoxToCell.C b/src/meshTools/sets/cellSources/rotatedBoxToCell/rotatedBoxToCell.C index 3d4ced517..2a83fef61 100644 --- a/src/meshTools/sets/cellSources/rotatedBoxToCell/rotatedBoxToCell.C +++ b/src/meshTools/sets/cellSources/rotatedBoxToCell/rotatedBoxToCell.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -43,7 +43,7 @@ Foam::topoSetSource::addToUsageTable Foam::rotatedBoxToCell::usage_ rotatedBoxToCell::typeName, "\n Usage: rotatedBoxToCell (originx originy originz)" " (ix iy iz) (jx jy jz) (kx ky kz)\n\n" - " Select all cells with cellCentre within parallelopiped\n\n" + " Select all cells with cellCentre within parallelepiped\n\n" ); diff --git a/src/parallel/decompose/decompositionMethods/hierarchGeomDecomp/hierarchGeomDecomp.C b/src/parallel/decompose/decompositionMethods/hierarchGeomDecomp/hierarchGeomDecomp.C index 038f0436a..516d1b10e 100644 --- a/src/parallel/decompose/decompositionMethods/hierarchGeomDecomp/hierarchGeomDecomp.C +++ b/src/parallel/decompose/decompositionMethods/hierarchGeomDecomp/hierarchGeomDecomp.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -306,7 +306,7 @@ void Foam::hierarchGeomDecomp::findBinary if (returnReduce(hasNotChanged, andOp<bool>())) { WarningInFunction - << "unable to find desired deomposition split, making do!" + << "unable to find desired decomposition split, making do!" << endl; break; } diff --git a/src/parallel/decompose/ptscotchDecomp/ptscotchDecomp.C b/src/parallel/decompose/ptscotchDecomp/ptscotchDecomp.C index 1555a1f6c..05d69c060 100644 --- a/src/parallel/decompose/ptscotchDecomp/ptscotchDecomp.C +++ b/src/parallel/decompose/ptscotchDecomp/ptscotchDecomp.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -543,7 +543,7 @@ Foam::label Foam::ptscotchDecomp::decompose { if (debug) { - Info<< "ptscotchDecomp : Using procesor weights " + Info<< "ptscotchDecomp : Using processor weights " << processorWeights << endl; } diff --git a/src/parallel/decompose/scotchDecomp/scotchDecomp.C b/src/parallel/decompose/scotchDecomp/scotchDecomp.C index f97192bee..f1ecc5e20 100644 --- a/src/parallel/decompose/scotchDecomp/scotchDecomp.C +++ b/src/parallel/decompose/scotchDecomp/scotchDecomp.C @@ -2,7 +2,7 @@ ========= \| \\ / F ield \| OpenFOAM: The Open Source CFD Toolbox \\ / O peration \| Website: https://openfoam.org - \\ / A nd \| Copyright (C) 2011-2018 OpenFOAM Foundation + \\ / A nd \| Copyright (C) 2011-2019 OpenFOAM Foundation \\/ M anipulation \| ------------------------------------------------------------------------------- License @@ -375,7 +375,7 @@ Foam::label Foam::scotchDecomp::decomposeOneProc { if (debug) { - Info<< "scotchDecomp : Using procesor weights " << processorWeights + Info<< "scotchDecomp : Using processor weights " << processorWeights << endl; } check typos_in_code.diff (28,903 bytes)

henry 2019-10-18 11:58 manager ~0010845	Thanks Timo Resolved by commit 81fca4c43af8ee439b3811660f1bdad78c4ae1b9 commit 4e6695e32dcc995840c92ee939d40a4fba54f99d

Date Modified	Username	Field	Change
2019-10-16 05:32	tniemi	New Issue
2019-10-16 05:32	tniemi	File Added: typos_in_comments.diff
2019-10-16 05:32	tniemi	File Added: typos_in_code.diff
2019-10-18 11:58	henry	Assigned To	=> henry
2019-10-18 11:58	henry	Status	new => resolved
2019-10-18 11:58	henry	Resolution	open => fixed
2019-10-18 11:58	henry	Fixed in Version	=> dev
2019-10-18 11:58	henry	Note Added: 0010845