View Issue Details
ID | Project | Category | View Status | Date Submitted | Last Update |
---|---|---|---|---|---|
0003659 | OpenFOAM | Bug | public | 2021-04-11 17:37 | 2021-04-11 19:38 |
Reporter | shock77 | Assigned To | henry | ||
Priority | normal | Severity | minor | Reproducibility | always |
Status | closed | Resolution | suspended | ||
Platform | GNU/Linux | OS | Ubuntu | OS Version | 12.04 |
Summary | 0003659: Wrong sum of physical quantities due to wrong oriented face normals in spite of usage of orientFaceZone | ||||
Description | Sorry for the previous post, the paged reloaded and the issue has been submitted incompletely. This is definitely a bug. Concerning the bug: To sample the mass flow rate through a faceZone with the operation "sum" the face normals of the faceZones are aligned with orientFaceZone. The face normals look well aligned in paraview after that operation, before they were chaotic. After decomposing and running the case, it is clear that the flux is again calculated with the previous oriented face normals and the face normal correction is ignored. This leads to wrong results. I have prepared a simplified testcase. Please note that the patch "outlet" and the faceZone "preOutlet" are very close to each other and should have the same result. Looking at the results (the postProcessing folder is attached) it shows, that the results are different. If sumMag instead of sum is used, the result is correct. This might be a work around in my case with no recircularisation, eddies etc., but might be a problem for other users: sum outlet (patch): 1.43 sum preOutlet (faceZone): 0.698 sumMag preOutlet (faceZone): 1.43 | ||||
Steps To Reproduce | gmshToFoam meshblock.msh surfaceFeatureExtract snappyHexMesh -overwrite transformPoints -scale '(0.001 0.001 0.001)' topoSet createPatch -overwrite constant/polymesh/boundary --> set type to symmetry of symmetryPlane orientFaceZone preOutlet '(0 0 1)' decomposePar mpirun -np 8 rhoCentralFoam -parallel | ||||
Additional Information | To see the face normals in paraview use the filter--> generate surface normals (remove the "splitting" and "consitency") and use glyphs to display the face normals. I am using openfoam7 to prepare the case. I am running the case with openfoam4.1 or openfoam5 on a work station (new versions do not work there). | ||||
Tags | No tags attached. | ||||
|
|
|
I don't think this is a bug but incorrect usage. However if you believe it is a bug can you provide a patch to resolve it? If not you will need to provide maintenance funding for us to look into it for you. |
|
I am sure it is a bug, but nobody is infallible. However I don't think I am skilled enough in coding to resolve this bug, but I will try it. Sorry it seems I got the concept of the Issue tracking wrong. I actually wanted to report this bug to prevent other users to suffer from it, but I have no patch to resolve this issue. I have actually been asked to report the issue here. I have a work around for my applications. However it is clear, that this approach is not suitable for other applications. Unfortunately I don't have the means to pay you to resolve the issue. |
|
> Sorry it seems I got the concept of the Issue tracking wrong. I actually wanted to report this bug to prevent other users to suffer from it, but I have no patch to resolve this issue. I have actually been asked to report the issue here. Can the person who asked you to report the problem you are having provide funding for us to work on it? If not can they provide a patch? If not who should fund us to work on it for you? We release OpenFOAM entirely open-source so we do not receive licence fees and the maintenance funding we have secured so far is not sufficient to cover the substantial cost of maintaining such a large and complex software package: https://openfoam.org/news/funding-2021/ |
|
I have already apologized. I know its hard to get funding and I don't want you to work on me. I have never asked for that. I reported it with the intention to prevent other users to have troubles with that issue, that's all. I am really happy that such a great software is freely accessible for all users worldwide. I won't report anything if I have no patch to resolve the issue. Please just close this issue. |
|
Likely user support, pending funding. |
Date Modified | Username | Field | Change |
---|---|---|---|
2021-04-11 17:37 | shock77 | New Issue | |
2021-04-11 17:37 | shock77 | File Added: testcase1.zip | |
2021-04-11 17:54 | henry | Note Added: 0011973 | |
2021-04-11 18:42 | shock77 | Note Added: 0011974 | |
2021-04-11 19:15 | henry | Note Added: 0011975 | |
2021-04-11 19:33 | shock77 | Note Added: 0011976 | |
2021-04-11 19:38 | henry | Assigned To | => henry |
2021-04-11 19:38 | henry | Status | new => closed |
2021-04-11 19:38 | henry | Resolution | open => suspended |
2021-04-11 19:38 | henry | Note Added: 0011977 |