2018-07-17 14:15 BST
Reporter: Monitored By: Assigned To: Category: Severity: Resolution: Profile:
any any none any any any any
Status: Hide Status:     Priority:  
any closed (And Above)     any  
Show: View Status: Show Sticky Issues: Use Date Filters: Relationships:
50 any No   No any
Platform: OS: OS Version: Tags:
any any any
Note By: any Sort by: Updated Descending  
Match Type: All Conditions Highlight changed (hours): 6  
- 

+ 


Viewing Issues (1 - 47 / 47)  Print Reports ]  CSV Export ]  Excel Export ]
    PID # CategorySeverityStatusUpdatedSummary
  00030063[OpenFOAM]
Patch
minornew2018-07-17Tweak wmake rules to avoid ld.gold linker issues
  00029981[OpenFOAM]
Feature
featurenew2018-07-13Implement Flamelet Model to the Dev version
  00030043[OpenFOAM]
Bug
majornew2018-07-10findLine function unexpected behavior in parallel run with preservePatches
  0002550 [OpenFOAM]
Feature
crashnew2018-07-10error when running movingConeTopoFvMesh in parallel
  00011472[OpenFOAM]
Bug
minornew2018-07-10Sample utility: line passing through internal cyclic boundary using midPoint set sampling definition isn't possible
  0003003 [OpenFOAM]
Bug
majornew2018-07-06I am not able to executable ParaView.
  00029852[OpenFOAM]
Bug
crashnew2018-07-02Problems with DPMFoam/MPPICFoam
  00028884[ThirdParty]
Patch
minornew2018-06-07Notes on how to deal with OpenGL support on ParaView 5.5 or newer
  00028324[OpenFOAM]
Bug
minornew2018-02-07interFoam: unstable when restarting a reconstructed case
  0002806 [OpenFOAM]
Bug
crashnew2018-01-14tutorial flameSpreadWaterSuppressionPanel for fireFoam crashes in parallel for different decompositons
  00027648[OpenFOAM]
Contribution
featurenew2017-11-22Extended rotatingMotion class for arbitrary start time
  00020436[OpenFOAM]
Bug
majornew2017-10-03turbulentTemperatureCoupledBaffleMixed doesn't get heat fluxes balance in case of anisotropic conductivity
  00021277[OpenFOAM]
Bug
majornew2017-10-03Volumetric heat source in solid with anisotropic conductivity
  00026964[OpenFOAM]
Feature
minornew2017-09-12Interpolate values with sphereToCell on orthogonal Mesh
  00025613[OpenFOAM]
Bug
crashnew2017-06-30cyclicACMI makes rhoCentral(DyM)Foam crash due to surface interpolation issue
  00025551[OpenFOAM]
Bug
crashnew2017-05-19Running parallel multiphaseInterDyMFoam with dynamicRefineFvMesh always crash
  00023411[OpenFOAM]
Bug
minornew2017-05-11wideBand submodel for radiation
  00024216[OpenFOAM]
Bug
majornew2017-05-03Conflict between CreateBaffle and flowRateInletVelocity boundary condition
  00025344[OpenFOAM]
Bug
featurenew2017-05-02singleGraph does not function in "chtMultiRegionFoam -postProcess"
  00024562[OpenFOAM]
Bug
majornew2017-02-10curvatureSeparation in 'Hot Boxes'-tutorial doesn't work
  00023021[OpenFOAM]
Bug
minornew2016-10-21wallHeatFlux utility: wrong calculation of heatfluxes using anisotropic kappa
  00022745[OpenFOAM]
Bug
minornew2016-10-07ACMI Boundary does not let particle go through (act like a wall)
  00021556[OpenFOAM]
Contribution
featurenew2016-09-27Deactivating ACMI interpolation for special fields
  00021908[OpenFOAM]
Bug
minornew2016-09-27ACMI - Distinguish between blocked and coupled faces could be improved for complex cases
  00020083[OpenFOAM]
Bug
majornew2016-06-03viewFactorsGen produces incorrect view factors in a very thin gap
  0002109 [OpenFOAM]
Bug
minornew2016-06-02Surface mesh changes at the interface, the ACMI doesn't work as expected.
  00019919[OpenFOAM]
Bug
majornew2016-03-20Problems with turbulentTemperatureCoupledBaffleMixed boundary condition
  00019937[OpenFOAM]
Bug
minornew2016-03-08Face centres (and by extension, cell centres) are calculated incorrectly when the initial guess is outside the face
  00018554[OpenFOAM]
Bug
featurenew2015-10-27decomposePar+refinementHistory doesn't work
  0001876 [OpenFOAM]
Bug
minornew2015-10-26Boundary field with jumpAMI not initialized properly
  00018693[OpenFOAM]
Bug
featurenew2015-10-18CHT with heat source
  000184511[OpenFOAM]
Bug
featurenew2015-09-04potentialFoam fails to initialize pressure-driven flows
  00018291[OpenFOAM]
Bug
majornew2015-09-02pressure jumps occur, when restarting rotating mesh simulation with interPhaseChangeDyMFoam
  00018411[OpenFOAM]
Bug
minornew2015-09-02Abnormal Courant number and abnormal phase fractions in /multiphase/multiphaseInterDyMFoam/laminar/mixerVesselAMI2D
  00013135[OpenFOAM]
Bug
majornew2015-05-01Pressure Jump Correction. Actuator Disc Model and numerical wiggles
  00013375[OpenFOAM]
Bug
minornew2015-04-30interDyMFoam performance of parallel solving depends on position of pressure reference point in enclosed space
  00014225[OpenFOAM]
Bug
minornew2015-03-11neighbour face search in cyclicAMI
  00006635[OpenFOAM]
Bug
majornew2015-01-03AMI corrupts passive scalar
  0000883 [OpenFOAM]
Bug
majornew2015-01-03Loosing mass when using cyclicAMI together with interDyMFoam
  0000887 [OpenFOAM]
Bug
majornew2015-01-03Conservativity Problem of AMI-Interpolation
  00010263[OpenFOAM]
Bug
minornew2015-01-03Mesh check in moveDynamicMesh fails altough checkMesh report OK mesh
  0001388 [OpenFOAM]
Bug
minornew2014-12-29mass flow of AMI1 and AMI2 do not match in pimpleDyMFoam/propeller tutorial
  0001235 [OpenFOAM]
Bug
minornew2014-12-29triSurface sample: Use point values instead of interpolation from face centres
  0001293 [OpenFOAM]
Bug
featurenew2014-05-13Improvement of moving (rotating) mesh cases
  00012891[OpenFOAM]
Bug
featurenew2014-05-12Limited validity range for multi-band fvDOM model
  0000973 [OpenFOAM]
Bug
minornew2014-02-10waveSurfacePressureFvPatchScalarField.C ImplizitEuler/CrankNicolson wrong?!
  0001103 [OpenFOAM]
Bug
minornew2013-12-06Issue using fvOptions with moving mesh

newfeedbackacknowledgedconfirmedassignedresolved