|
|
| Reporter | rob3rt 0ng | Assigned To | henry | |
|---|
| Priority | normal | Severity | minor | Reproducibility | always |
|---|
| Status | closed | Resolution | no change required | |
|---|
| Platform | Unix | OS | Other | OS Version | (please specify) |
|---|
|
|
| Summary | 0002866: Something is critically wrong with the small3dPoolFire tutorial, maybe also with other related density-injection cases |
|---|
| Description | There is an inherent glitch or bug when specifying the amount of fuel injection in the poolFire3D tutorial case. Regardless of the amount of injection I use, I always obtain the same temperature, velocity and flame length. For example, the flow properties and thermal characteristics of a fire due to accident or bushfire (for example 100 MW) are significantly different than if a lighter (~50 W). However, according to the tutorial they are the same. |
|---|
| Steps To Reproduce | Change the value of heat release rate or velocity injection of CH4 (0/U) by two or three order of magnitude (i.e. from (0 0.01 0) to (0 0.00001 0)), and you will see almost no difference in terms of temperature, velocity and flame length. |
|---|
| Tags | poolFire |
|---|
|
|
