/*--------------------------------*- C++ -*----------------------------------*\ | ========= | | | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox | | \\ / O peration | Version: 2.3.0 | | \\ / A nd | Web: www.OpenFOAM.org | | \\/ M anipulation | | \*---------------------------------------------------------------------------*/ FoamFile { version 2.0; format ascii; class dictionary; object refineMeshDict; } // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // // Cells to refine; name of cell set set c0; // Type of coordinate system: // - global : coordinate system same for every cell. Usually aligned with // x,y,z axis. Specify in globalCoeffs section below. // - patchLocal : coordinate system different for every cell. Specify in // patchLocalCoeffs section below. coordinateSystem global; //coordinateSystem patchLocal; // .. and its coefficients. x,y in this case. (normal direction is calculated // as tan1^tan2) globalCoeffs { tan1 (1 0 0); tan2 (0 1 0); } patchLocalCoeffs { patch outside; // Normal direction is facenormal of zero'th face of patch tan1 (1 0 0); } // List of directions to refine directions ( tan1 tan2 ); // Whether to use hex topology. This will // - if patchLocal: all cells on selected patch should be hex // - split all hexes in 2x2x2 through the middle of edges. useHexTopology false; // Cut purely geometric (will cut hexes through vertices) or take topology // into account. Incompatible with useHexTopology geometricCut false; // Write meshes from intermediate steps writeMesh false; // ************************************************************************* //