/*---------------------------------------------------------------------------*\
| =========                 |                                                 |
| \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox           |
|  \\    /   O peration     | Version:  4.1                                   |
|   \\  /    A nd           | Web:      www.OpenFOAM.org                      |
|    \\/     M anipulation  |                                                 |
\*---------------------------------------------------------------------------*/
Build  : 4.1-1e03d68d4f4e
Exec   : checkMesh -allTopology -allGeometry
Date   : Oct 19 2016
Time   : 23:27:30
Host   : "omega"
PID    : 17611
Case   : /home/ofuser/Desktop/mantis/bug2299/OpenFOAM_2245
nProcs : 1
sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster
allowSystemOperations : Allowing user-supplied system call operations

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create polyMesh for time = 0

Enabling all (cell, face, edge, point) topology checks.

Enabling all geometry checks.

Time = 0

Mesh stats
    points:           27612
    faces:            184989
    internal faces:   177637
    cells:            81709
    faces per cell:   4.43802
    boundary patches: 7
    point zones:      0
    face zones:       0
    cell zones:       1

Overall number of cells of each type:
    hexahedra:     0
    prisms:        35783
    wedges:        0
    pyramids:      0
    tet wedges:    0
    tetrahedra:    45919
    polyhedra:     7
    Breakdown of polyhedra by number of faces:
        faces   number of cells
            5   7

Checking topology...
    Boundary definition OK.
    Cell to face addressing OK.
    Point usage OK.
    Upper triangular ordering OK.
    Face vertices OK.
 ***Open cells found, number of cells: 28. This problem may be fixable using the zipUpMesh utility.
  <<Writing 28 cells with over used edges to set zipUpCells
  <<Number of faces with non-consecutive shared points: 57. This might indicate a problem.
  <<Writing 66 faces with non-standard edge connectivity to set edgeFaces
    Number of regions: 1 (OK).

Checking patch topology for multiply connected surfaces...
                   Patch    Faces   Points                  Surface topology Bounding box
                    Hull     7158     3581      ok (closed singly connected) (-1.45709 -0.322225 -0.389552) (1.59091 0.28566 0.219656)
        boundingbox_xmin       18       16  ok (non-closed singly connected) (-6.53709 -2.86293 -2.92994) (-6.53709 2.82667 2.75966)
        boundingbox_xmax       16       15  ok (non-closed singly connected) (6.67091 -2.86293 -2.92994) (6.67091 2.82667 2.75966)
        boundingbox_ymin       40       31  ok (non-closed singly connected) (-6.53709 -2.86293 -2.92994) (6.67091 -2.86293 2.75966)
        boundingbox_ymax       40       31  ok (non-closed singly connected) (-6.53709 2.82667 -2.92994) (6.67091 2.82667 2.75966)
        boundingbox_zmin       42       32  ok (non-closed singly connected) (-6.53709 -2.86293 -2.92994) (6.67091 2.82667 -2.92994)
        boundingbox_zmax       38       30  ok (non-closed singly connected) (-6.53709 -2.86293 2.75966) (6.67091 2.82667 2.75966)

Checking geometry...
    Overall domain bounding box (-6.53709 -2.86293 -2.92994) (6.67091 2.82667 2.75966)
    Mesh has 3 geometric (non-empty/wedge) directions (1 1 1)
    Mesh has 3 solution (non-empty) directions (1 1 1)
    Boundary openness (-2.38729e-18 3.22284e-17 5.19236e-17) OK.
 ***Open cells found, max cell openness: 0.991171, number of open cells 30
  <<Writing 30 non closed cells to set nonClosedCells
    Minimum face area = 1.35709e-07. Maximum face area = 3.40384.  Face area magnitudes OK.
    Min volume = 1.46649e-10. Max volume = 1.52117.  Total volume = 427.478.  Cell volumes OK.
    Mesh non-orthogonality Max: 89.6789 average: 20.027
   *Number of severely non-orthogonal (> 70 degrees) faces: 127.
    Non-orthogonality check OK.
  <<Writing 127 non-orthogonal faces to set nonOrthoFaces
 ***Error in face pyramids: 9 faces are incorrectly oriented.
  <<Writing 9 faces with incorrect orientation to set wrongOrientedFaces
 ***Max skewness = 69.4943, 10 highly skew faces detected which may impair the quality of the results
  <<Writing 10 skew faces to set skewFaces
    Coupled point location match (average 0) OK.
 ***Error in face tets: 46 faces with low quality or negative volume decomposition tets.
  <<Writing 25 faces with low quality or negative volume decomposition tets to set lowQualityTetFaces
    Min/max edge length = 1.69448e-05 3.32422 OK.
   *There are 4 faces with concave angles between consecutive edges. Max concave angle = 89.7512 degrees.
  <<Writing 4 faces with concave angles to set concaveFaces
    Face flatness (1 = flat, 0 = butterfly) : min = 0.579636  average = 0.996118
   *There are 8 faces with ratio between projected and actual area < 0.8
    Minimum ratio (minimum flatness, maximum warpage) = 0.579636
  <<Writing 8 warped faces to set warpedFaces
    Cell determinant (wellposedness) : minimum: 6.77063e-08 average: 1.32516
 ***Cells with small determinant (< 0.001) found, number of cells: 3068
  <<Writing 3068 under-determined cells to set underdeterminedCells
 ***Concave cells (using face planes) found, number of cells: 33
  <<Writing 33 concave cells to set concaveCells
    Face interpolation weight : minimum: 0.0058622 average: 0.414274
 ***Faces with small interpolation weight (< 0.05) found, number of faces: 79
  <<Writing 79 faces with low interpolation weights to set lowWeightFaces
    Face volume ratio : minimum: 0.00526866 average: 0.722615
 ***Faces with small volume ratio (< 0.01) found, number of faces: 9
  <<Writing 9 faces with low volume ratio cells to set lowVolRatioFaces

Failed 9 mesh checks.

End